Pressure Testing Your Porsche Macan Coolant System

  • Project Time: 30 min
  • Tab: $
  • Talent
  • Tools: Coolant Pressure Tester
  • Parts Required: None if no leaks
  • Performance Gain: Functioning Coolant System
  • Complementary Modification: Coolant Flush and Fill

A regular coolant pressure test is a good way to stay on top of any potential leaks before they get too big.

Hot tip

Make sure the system is cold

Steve Vernon, DIY Expert

//

Project Photos

Figure 1 You will need a Coolant Pressure Testing Kit to perform this test. We use the Schwaben kit. It comes complete with all of the adapters and everything we needed to test our Macan.
Figure 2 Make sure that the system is stone cold and that it is not under pressure. Remove the coolant fill cap (red arrow).
Figure 3 Go through the series of adapters in your kit and screw on the proper pressure cap. It is imperative that the cap is a correct fit. If the cap leaks air out the test will not work.
Figure 4 Attach the hose and pump to the cap and pressurize the system to at least 1 bar absolute.
Figure 5 The system should hold pressure. If pressure drops then you have a leak somewhere. This is also another reason why the cap must be an exact fit.
Figure 6 Do not forget to release the pressure at the pressure relief valve (red arrow) before disconnecting the hose or unscrewing the cap. If a leak is confirmed please see our articles and videos on coolant hose replacement and coolant flush and fill for additional assistance.



Comments and Suggestions

Add a New Comment
Upload a Photo:

Got more questions? Ask any of our automotive experts.