Porsche Macan Battery Replacement

  • Parts Required: Battery
  • Performance Gain: Working vehicle
  • Complementary Modification: Replace cabin air filter

A word before you disconnect the battery.

Every time the battery is disconnect it needs to be reprogramed into the ECU for the Macan to function. If you do not have a scan tool to do this you will need to get or borrow one before you start. If you are planning on DIYing your Macan a scan tool is a good and wise investment.

We use the Foxwell 510 Elite and are very happy with it. Pelican sells them and it is something you will really need even for doing some of the basic maintenance like resetting maintenance codes, fluid changes and code reading.

Hot tip

Take a picture of the label on the battery

Steve Vernon, DIY Expert

//

Project Photos

Figure 1 If you are ever in the need to jump start your Macan you do not want to do it from the battery. The battery is in the rear under the cargo area. Porsche like most modern vehicles has provided a much easier way to jump the car. Raise the hood and right under the driver's side windshield by the windshield washer fluid fill cap is a covered port for the positive cable (red arrow). Attach the positive end of your jumper cable to the positive end of a good battery then lift the plastic cap and attach the other end to the positive post on the Macan (red arrow). Next attach the negative or ground end of the jumper cables to the negative terminal on the good battery and then attach the other end to the ground post (blue arrow) on the Macan. If the battery has gone completely dead you may need to reprogram it and you may loss some of the remote settings saved.
Figure 2 Have your scan tool handy. We use the Foxwell 510 Elite and are very happy with it. Pelican sells them and it is something you will really need even for doing some of the basic maintenance like resetting maintenance codes, fluid changes and code reading.
Figure 3 The battery on the Macan is located in the rear cargo area. Open the rear hatch and lift up on the handle (red arrow).
Figure 4 Remove the rear cover to expose the spare. Unscrew the plastic retaining lug (blue arrow) and remove the spare.
Figure 5 If your Macan is equipped with a base speaker in the rear you will need to remove it first (red arrow). Use a T27 Torq and remove the two screws (blue arrows) and pull the speaker case up.

Figure 6 Squeeze in the tab on the connection (red arrow) and separate the wiring connection and remove the speaker case from the vehicle.
Figure 7 You now have clear access to the battery. The positive post should be covered (red arrow). The negative or ground post (blue arrow) should not have a cover on it. Both should be clearly marked on the battery itself with positive and negative symbols.
Figure 8 Use a 10mm wrench and loosen the end of the cable from the post (red arrow). Do not try and take the nut off completely. You do not need to and it will not come off any way.
Figure 9 Use a 10mm wrench and loosen and remove the positive cable from the post (red arrow).
Figure 10 Next remove the vent line from the battery (red arrow). With both cables removed you can now use a 13mm socket on an extension and remove the hold down bracket (blue arrow). Set the bracket and strap aside and safely lift the battery from the vehicle. Be careful, it is heavy. Installation is the reverse of removal.
Figure 11 Plug your scan tool in to the access port on the driver side under the dash. It will be close to where your left foot rests for left side drive vehicles. When you go to reprogram the battery you will need the follow information. Take a picture of the info to save you running back to the rear to keep checking. The cable on the scanner will not reach the back of the Macan.

Battery type: rating in Ah (A)
Date of manufacture of the battery, stamped on negative terminal (B)
Battery I-no. for 2D code:( C)
Item number (D) and
Battery manufacturer (E)

Comments and Suggestions

John

January 16, 2026

Can I replace the battery with interstate brand? Our macan has 75ah battery installed and I bought an 80ah. MTX-94R/H7. I'm worried I can't use this battery and its tough to return via online purchase.

Followup from the Pelican Staff:

As long as the size, group and rating are the same, you can use any high quality battery brand. - Nick at Pelican Parts

PFJohns

August 28, 2025

Greetings Pelican Parts. I want to add to your excellent battery DIY that if your Macan battery is totally dead, the rear hatch will not open by normal means. You'll have to get into the car, drop the back seats, crawl into the space and find the little slot at the bottom of the hatch see photo-not the one with the twist opener, but the little one below it. Pry off the cover with a screwdriver, stick an awl or small screwdriver into the right side of the slot and move it to the left. This will engage the manual emergency hatch latch, allow you to raise the hatch, and you can now access the battery space. The picture is of a 2020 Macan base.

Followup from the Pelican Staff:

Thanks for the Info. We appreciate it. - Nick at Pelican Parts

Sulaiman

May 25, 2025

very usefull article . Thanks pelican staff.

Followup from the Pelican Staff:

Thanks for the feedback. Glad it was helpful! - Nick at Pelican Parts

bigbass

February 21, 2025

I don't see a battery reset setting in the Foxwell 510 Elite. What is it under?

Followup from the Pelican Staff:

I am not familiar with the foxwell tool. I would reach out to them directly. - Nick at Pelican Parts

Charles S Brice Steve

September 13, 2024

Followup from the Pelican Staff:

Martin Garfield

December 28, 2023

Can yo recommend a code scanner that can code and register a battery for 2015 macan

Followup from the Pelican Staff:

This one should do it for you: https://www.pelicanparts.com/More_Info/PEL018656SCH01A.htm?pn=PEL-018656SCH01A - Nick at Pelican Parts

JB

December 1, 2023

Neither of the alph-numeric codes pointed out by the yellow arrow are 11 characters.
The word serial number is used to describe both sets of characters blue and yellow arrows. Other blogs list the serial number as starting with 205, and the "eleven place" Porsche PART number is supposedly 95861109221. Some clarification may be in order.
Thanks for the detailed guidance and photos!

Followup from the Pelican Staff:

I'll have the info updated. See attached for detailed info. Battery type: rating in Ah (A) Date of manufacture of the battery, stamped on negative terminal (B) Battery I-no. for 2D code:( C) Item number (D) and Battery manufacturer (E) - Nick at Pelican Parts

Add a New Comment
Upload a Photo:

Got more questions? Ask any of our automotive experts.