No it doesn't. As one reviewer said square peg round hole, which is exactly the problem.
Square switch that doesn't fit through the round hole in the dash. The blower motor must be removed from inside the luggage compartment. There is a round hole in a panel that is behind the dash. There is small gap, approx. 5/8", between the panel and the dash. The switch will not fit through the hole and reach the front of the dash. My advice find a used Porsche part.
March 16, 2016
not like origional
July 21, 2014
I can't seem to find a fog light switch here or in competing sites that looks like the original switch assembly. The prior reviewer is pointing out something obvious, but no response from PP. Is this a case where the squarish end doesn't matter since it on the inside of the panel, but the pull switch fits the round hole?
Followup from the Pelican Staff: The square part doesn't need to go through the round hole. You will separate the pull-switch front part from the square back part. You will then line up the square back part to the back side of the hole in the dash by reaching up and under the knee bar. You'll then mate it back up with the pull-switch front portion, which does go through the hole from the front side. This is a universal part, so it isn't an exact match to the original Porsche switch (which, to my knowledge, is no longer available)
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.