The Textar Pads part # 986-352-939-10-M3 do not work with these sensors. The metal part of the pad is too thick or the sensor is not made for the pads.
December 4, 2015
Buyer be ware - this does not fit all specified cars
Contrary to Pelican recommendation, this does not fit some cars w/o ceramic brakes (i.e. at least some 2011 Cayman S call for the same sensors as those use with the ceramic brakes). AND PELICAN REFUSES TO CORRECT THEIR MISTAKE BY TAKING THE WRONG ONES BACK.
Rating is reflection on Pelican recommendation accuracy. Actual product not used but would rate it "Good" based on physical appearance.
July 29, 2015
Perfect fit with new ATE pads
These sensors fit either the old original pads or the new ATE pads I ordered. Odd that the front sensor fit into the new ATE pads but do not fit into the original pads - Porsche must have made a spec change somewhere along the line.
September 6, 2014
Fits right. Works great.
May 27, 2014
Installed on my 2002 986S
Fit for fronts and rears. Works great. Same part number for all 4 wheels.
August 24, 2013
Easy install sensors
What can I say. Just snap in and hook up. Eazy Pezy!
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.