Great Quality, Fits Well. This was a little challenging to fit however I ended up using a loop of fencing wire around 2 inches in diameter looped around the pedal end of the spring and used a ratchet tie down strap between the wire loop and the back of the set runner to gently stretch the spring into the correct position to gently lever it on to the peddle. This made the job a lot easier and controlled the spring pressure.
October 16, 2012
Clutch pedal spring
I replaced the clutch pedal spring in my 1978 911 SC Targa. As noted in the comments it took allot of strength to install the spring. My clutch pedal has a positive feel now. Thanks Pelicanparts.com. You can trust Pelicanparts.com for quality parts for you Porsche.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.