Pelican Parts
Parts Catalog Accessories Catalog How To Articles Pelican Tech Forums
Call Pelican Parts at 888-280-7799
Home > AccessoriesToolsSpecialty ToolsPorsche Specialty ToolsPorsche Specialty Tools
911 Engine/Transmission Jack Adapter


This tool is similar in operation to the tool for the early engine cars, but also incorporates an adjustable cross member providing support to the heat exchangers, to prevent side to side tipping of the motor transmission assembly. The top of the adapter cradles the case bottom as well as the large rectangular boss at the rear of the motor, keeping the motor from shifting side to side, or front to back. This plate pivots on the base, and by means of an adjustment bolt, the engine and transmission can be tilted to line everything back up during installation. The base has a 1-3/16" diameter pin which sets in place of the cup on most floor jacks 2-1/4 ton and larger. The bottom of the tray, as well as the cross member arms, are lined in rubber to protect the soft engine case and the heat exchangers. This tool works on all 911 and 930 engines 3.2-3.6 liter without the removable sump plate.


Customers who bought this product also were interested in:

P201 Heavy Duty Engine Holding Fixture, P201, For 356, 911, 912, 930, 914   P213 Feeler Gauge (.004 inches). Feeler Gauge Holder and one replaceable .004" blade. needed for correct adjustment of valve clearance.   Clutch Alignment Tool, (Spline count = 23; Pilot diameter = 14.9 mm; Spline diameter = 25.4 mm)   Flywheel Lock. This flywheel lock is for the engine yoke only.
About Us
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
Sign Up for Pelican Pit Stop News & Special Offers
Copyright 2016 Pelican Parts, LLC
DMCA Registered Agent Contact Page

Page last updated: Mon 2/19/2018 12:18:50 AM