Satin™ Custom Car Cover
Stretch is an indoor Custom Car Cover fabric. It will fade if exposed
to extended sun, and is not water resistant.
Satin Stretch is the SOFTEST fabric available, and has Lycra
yarns to hug every contour of a vehicle. Blind stitching results in
invisible seams - this is a SEXY car cover! The material has Lycra
fibers for stretch in both directions, mirroring every perfect contour
of your vehicle. And the inner liner is the softest fleece we've been
able to find - specially designed not to rub off on convertible tops.
It is available in solid color designs, including Black, Steel Gray,
Pearl White, Burgundy Red, Dark Blue, Fly Yellow, Tan, and Forest
A 3 layer
Custom Car Cover material suited for light weather conditions (perfect
for occasional use or vehicles stored under a carport). Triguard is
fairly soft and very compact. Do not use Triguard in harsh weather or
sun. Triguard is also not suited in areas with industrial fall out
Triguard Custom Car Covers are a great choice. Triguard is a
lightweight, three layer material which protects from dirt, dust,
light water, bird droppings and other mild hazards. It is perfect for
use in a garage or under a carport. Triguard is also treated with UV
inhibitors, which helps it stand up to ultra-violet rays emitted by
the sun. Although Triguard contains these UV inhibitors, it is not
recommended for very sunny climates - Silverguard™ or Stormproof™
would be better options.
Triguard™ is a thin and lightweight fabric. The lightness makes
it very easy to handle, but offers little protection from dings and
scratches. If your vehicle is exposed to dings and scratches from
pets, children or a crowded garage, we recommend Coverbond 4.
make Coverbond 4 a very thick and bulky Custom Car Cover. It is not
suggested for daily users, or for people with large SUVs. However, the
extra bulk helps to guard against minor nicks and dings, and even
helps in light hail. Coverbond 4 is suggested for moderate weather or
A 3 layer
Custom Car Cover fabric which is similar to Triguard, but with an
advanced micro-porous film middle layer. The film aids in preventing
water penetration, while allowing vapor to escape. Mosom is a good
general use cover. If the vehicle is exposed to significant sun, we
suggest Silverguard or Stormproof.
layers are Spunbond Polyropylene, and the middle layer is a special
micro-porous film. The middle film layer is an excellent rain barrier,
while allowing for vapors to pass through. It is a great choice for
all-round car cover use, suggested for most conditions except extreme
sun, snow or ice - in which case we suggest Stormproof™. Mosom is a
non-woven material, so in the unlikely event a rip occurs in the
material, it will not run.
Mosom™ car covers are very breathable, almost as breathable as
Stormproof™. If your vehicle is exposed to rain for long durations,
Mosom™ or Stormproof™ are both excellent choices. If protection from
light nicks, scratches and light hail is required, Coverbond 4 is the
properties to Mosom, but with more sun resistance and slightly less
breathability. Silverguard is a 300 denier polyester woven Custom Car
Cover fabric with a unique encapsulative coating. It is perfect for
general use, even in very sunny climates. The silver coating helps to
Silverguard™ is a 300 denier polyester material with a reflective
and water resistant coating. It is a great choice for all-round car
cover use, suggested for most conditions except extreme rain, snow or
ice - in which case we suggest Stormproof™. 300 denier is a strong,
heavy weave which will not rip or tear easily. The silver coating on
Silverguard™ does an excellent job of reflecting sunlight, while
keeping rain and animal droppings from damaging the vehicle finish.
Silverguard™ car covers are breathable, although not as
breathable as Mosom™ or Stormproof™. If your vehicle is exposed to
rain for long durations, Mosom™ or Stormproof™ are better car cover
options. If protection from light nicks, scratches and light hail is
required, Coverbond 4 is the best choice.
Guilford Mills, Stormshield is a unique polyester knitted Custom Car
Cover fabric with a "peach fizz" lining. The lining adds extra
softness and thickness. Stormshield is perfect for virtually all
weather conditions. Stormshield is available in black, gray, blue,
red, yellow and tan. In addition, two tone combinations are available
with black sides and a color center.
culmination of over a decade of material engineering, it has only
recently been possible to manufacture the microscopic yarns which go
into this advanced micro-fiber Custom Car Cover material. Only one
textile mill in the world was able to meet Coverking's specifications
- and although challenged by Coverking's design, the results are truly
a triumph for car cover users! Stormproof is UNCOATED
and UNTREATED this means that even after months or
years of use, it will have the same properties! Stormproof feels more
like an expensive golf jacket, yet is tested to be the MOST WATER
RESISTANT and (because there are no coatings) the MOST BREATHABLE. You
can't go wrong with Stormproof - available in gray, black, red, wine,
and two tone combinations with black sides.
Stormproof™ material is designed by Coverking and made by one of
the world's leading textile mills. It is the most waterproof yet
breathable car cover material available. Stormproof™ car cover
material exhibits outstanding sun and U.V. resistance, able to last
for years in Arizona sun without fading. The micro-fiber base material
is soft to the touch and won't scratch a car's paint - yet is rolls up
into a very compact package for easy storage.
Stormproof™ is unique in the field of Custom Car Cover materials
in that it is Untreated,
Uncoated, and Unprocessed.
Through Coverking's advanced textile engineering, Stormproof™
accomplishes the needs of a premium Car Cover material without the
coatings which can easily wear off, the treatments which fade over
time, and the processing which can be undone the first time it is
exposed to water. Speak to somebody who has owned other "premium" Car
Cover materials and you'll hear how the other Car Cover fabrics work
as advertised for the first few months, but then degrade in their
water resistance - the problem is that the treatments and coatings can
wear off, scratch off, or simply wash off.
Stormproof™ is the only Car Cover material we can suggest for any
climate or car cover need - it excels in every area except protection
from dings and hail (in which case we recommend Coverbond4).
Stormproof™ will last for years, and compliment your vehicle with the
exciting colors and two tone designs it is offered in.