The wheel bearings and parts carry the weight of the vehicle as the hub spins around them. They work under extreme heat and stress. Always make sure they are properly packed in the correct grease and use new hardware when servicing them.
Wheel Bearing (45 X 85 X 41 mm, Rear Left or Right)
Note: A premium lithium complex NLGI grade 2 grease with drop point of over 500 deg. F. Designed for late model vehicle wheel bearings, chassis, suspension and u-joints. Wide temperature range -40 deg. F to 300 deg. F. Extreme pressure additives. Amber color.
Note: A very stable aluminum complex NLGI grade 2 grease with drop point of 500 deg. F. Contains rust and oxidation inhibitors, anti-wear and extreme pressure additives and fortified with "moly" and graphite. For use in automotive disc/drum brakes, chassis and suspension systems. Black color.
Remember to lube and pack your CV joints when you replace them. Pelican carries both the LubroMoly and the Swepco 101 grease for complete lubrication of your joints. Both are very good and very slippery. Each contains enough grease to effectively one CV joint from completely dry.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.