Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
2003 BMW 325i Base Sedan
BMW Home > 2003 BMW 325i Base Sedan > Transmission & ClutchClutch & Flywheel  

Clutch & Flywheel

- Page 1

Clutch Super Kits

Clutch Super Kits for E46
In this kit, you get everything you need to replace your clutch all at once. If you are spending the time and effort to pull your engine out of your car, you might as well make sure that you are replacing and fixing every piece that might need attention, while you have access to it. Here's what the kit includes:
  • Three piece clutch kit
  • New bolts for flywheel and clutch pressure plate
  • New crankshaft rear seal (aka flywheel seal)
  • New transmission Input Shaft seal
  • New shifter selector rod seal
  • New exhaust flange gaskets/seals
  • New exhaust flanges
  • New flex disc nuts (where applicable)
  • New pilot bearing
  • New release bearing spring clip
  • New clutch pivot pin
  • New slave cylinder
If you don't already own one, you will also need the flywheel pilot bearing puller tool for removing the flywheel pilot bearing. You will also need the clutch alignment tool as well.

NOTE: Flywheels are not included with these kits. If your old flywheel is worn beyond its re-surfacing limit, it should be replaced with a new one available below. NOTE: Proper installation requires clutch and disc to be installed on the flywheel before removal of shipping plate. Removal of the shipping plate before installation on the flywheel will require the SAC springs to be reset with factory special tools. To remove this plate, you MUST use: (1) CT-1011 Tool, not included in kits.

Clutch Kits

This section contains clutches and related items. If you are looking for that little piece to complete your clutch job, you are in the right place. When doing a clutch job, it's always a good idea to replace the rear end seal on the engine at the same time and also replace the throw-out bearing, flywheel bolts and pilot bearing. You should also replace the clutch release fork and the master/slave cylinders at the same time for added insurance. If you are re-using your flywheel, you should have it re-surfaced so your new clutch seats correctly.
Clutch Kit

Clutch Kit
Clutch Kit  
[ More Info ]

Note: 228mm w/o Sequential Manual Gearbox

Brand Rating

SPEC Stage 1 Clutch Kit
SPEC Stage 1 Clutch Kits feature an integrally molded carbon kevlar-based, high performance organic lining that offers smooth engagement and excellent life. This lining has an integrally bonded steel backing for strength under high clamp loads and temperatures. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street and many track/off-road applications. Some kits may not include the throwout bearing, please contact us to see if your kit does.
BMW Home  >  2003 BMW 325i Base Sedan > Transmission & Clutch  >  Clutch & Flywheel  

  Page 1 of 7  1234567>

Browse Clutch & Flywheel for all 3-Series E46 (1999-2006) vehicles

Page last updated: Wed 2/14/2018 12:36:17 AM
About Us
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
Sign Up for Pelican Pit Stop News & Special Offers

Close this window