Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1987 BMW 325e Base Coupe
BMW Home > 1987 BMW 325e Base Coupe > Suspension & SteeringSuspension Upgrades & Performance 

Suspension Upgrades & Performance

- Page 4

Eibach Anti Roll Kit

Eibach is the #1 choice of Automotive Enthusiasts Worldwide. Eibach ANTI-ROLL-KIT sway bars substantially reduce body-roll through increased design stiffness over your vehicles stock bars. The impressive results are increased balance, handling and cornering grip in all performance-driving situations.

VOGTLAND Sport Springs

VOGTLAND performance lowering springs, manufactured in Germany, provide multifaceted improvements for your vehicles suspension. The comprehensive design generates a better overall appearance while making a significant improvement in performance. The compound spring rate allows for comfortable ride quality under normal driving conditions while providing maximum performance when being pushed to the limit.

Koni Sport Suspension Kit

Complete car-set kits consisting of KONl high performance, adjustable Sport shocks, struts and precisely fitting H&R lowering springs. KONl Sport struts and shocks are the industry leader for user adjustable damping for daily drivers to weekend warriors. KONl Sport's familiar yellow color has for decades meant superior motion control and adjustability for the discerning driving enthusiast.

Front lowers approx. 1.7 inches/ 40mm

Turner Motorsport Sway Bar Reinforcement Kits

A great upgrade for the E30. Any suspension modification will put stress on the front and rear swaybar mounts. Reinforcing the swaybar mount to the strut will keep your swaybar geometry in spec and prevent a costly and ugly repair. Requires welding.

Turner Motorsport Hub-Centric Wheel Spacers

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer "concept". This is not just a rework of an existing spacer but a ground-up, clean sheet design based on years of BMW service and motorsports.

This latest spacer design incorporates pockets around the entire circumference of the spacer. These pockets allow you to easily pop the spacer off with a flat blade screwdriver without damaging it. TMS starts with very strong and lightweight high-grade aluminum with a strong resistance to corrosion. They go the extra step and have our spacers coated with a military-spec hard-coat for extreme corrosion prevention and with a dark gray color to blend in with your wheel and brake package for best appearance. All Turner Spacers are CNC machined to very tight machining tolerances to save weight while not affecting strength. These spacers are engineered and manufactured to preserve ride quality, last a long time, and enhance your BMW's handling and looks. Each spacer is laser engraved with its size for fast identification.

NOTE: TMS Spacers are suitable for 5-lug (5x120mm) applications ONLY.

ST Suspension Kits

The insight and German engineering that go into shaping each ST component are centered around achieving a telepathic bond between man and machine.
A balance of exceptional strength and performance for vehicles with precision handling and control for drivers.
Respected in the insustry for solid design, ST Suspensions offer the versatility to adapt to both the street of the meanest of tracks.
It is the result of rigorous testing and detail that ensures all levels of performance are met, and expectations for a superior driving experience are well surpassed.
ST Sport Lowering Kits
By combining the ST Sport Springs and ST Sport Shocks you get the best of all worlds and take the guess work out of suspension tuning, getting it done right the first time.
ST Sport Springs are specifically engineered for optimal performance and comfort. Improve your ride with ST Suspension Sport Springs to lower the center of gravity, reduce body roll in corners, and limit weight transfer under acceleration.
ST Sport Shocks are designed exclusively for lowered vehicles featuring advanced valve tuning targeted at controlling the higher spring rates associated with performance lowering spring. Shortened or reduced rebound travel optimizes the piston stroke of the shock absorber guaranteeing a balanced chassis under any circumstances.

ISC Coilovers

ISC coilovers allow for greater control of your suspension setup. If you're looking for a replacement or upgrade over your current suspension, ISC has you covered. Their products are great for someone looking for performance and visual enhancements along with a great amount of adjustability. The N1 coilovers are more suited for the performance oriented driver because it allows for more overall suspension adjustability. The N1 coilovers come standard with pillow ball upper mounts, adjustable camber plates, and a thrust bearing kit. ISC also offers the N1 Basic kit, which come with standard top plates instead, for people looking for no-frills coilovers. These may be more suited for drivers who are looking for a better look, and are not looking for aggressive stance or track performance. Most ISC coilover applications will have the ability to adjust the ride height by three inches or more. The preload is separate from ride height, so however low you decide to set your coilovers at, the ride will stay the same. ISC offers three different valving options to suit all sorts of customers' driving types; street comfort, street sport, and track race.
ISC N1 Basic Street Sport Series
The ISC N1 Basic was made to simplify the product and eliminate any feature that may not be used in your average street car which is not going for track performance, or aggressive stance. The N1 Basic coilovers come standard with standard top plates. This set is specifically valved for street sport, which is perfectly suited for spirited driving on the streets.
Valving Option:Street Comfort
Front Spring:135mm / 10kg
Rear Spring:115mm / 9kg
Front Pillowball:Pillowball w/ Camber Plates
Rear Pillowball:Basic w/ Top Plates, No Camber Plates

Valving Option:Street Sport
Front Spring:135mm / 10kg
Rear Spring:115mm / 9kg
Front Pillowball:Pillowball w/ Camber Plates
Rear Pillowball:Basic w/ Top Plates, No Camber Plates
BMW Home  >  1987 BMW 325e Base Coupe > Suspension & Steering  >  Suspension Upgrades & Performance 

  Page 4 of 7  <1234567>

Browse Suspension Upgrades & Performance for all 3-Series E30 (1983-1991) vehicles

Page last updated: Wed 3/14/2018 02:31:28 AM
About Us
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
Sign Up for Pelican Pit Stop News & Special Offers

Close this window