Racing Dynamics' professional race car engineers designed this strut brace for chassis stiffness and ease of mounting. A specially designed extrusion was used for increased stiffness and to avoid cutting and welding together multiple pieces (an inherently weaker design). End plates are machined on high speed CNC machining centers for exactness and repeatability ensuring the BMW owner of the finest strut brace available anywhere.
A common weak point on the 3 series BMW is the rear shock tower. This kit mounts on top of the rear shock tower and can either be bolted or welded in place. These plates are thicker than the factory reinforcement plates.
As E36s and Z3s get older and see more track-use, they start develop cracks and bends in places that see a lot of stress. One of the most stressful areas is the front subframe. It's a good idea to reinforce your front subframe the next time you're doing any suspension work. This kit reinforces the upper and lower tabs of the subframe where the motor mount is located. Requires welding.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.