Pelican Parts
Parts Catalog Accessories Catalog How To Articles Pelican Tech Forums
Call Pelican Parts at 888-280-7799
Get FREE Ground Shipping with the purchase of $179 in qualifying parts!
 
FEATURES
PORSCHE 911 TECH ARTICLES
> Valve Adjustment
> Shifting Improvements
> Jacking Up Your 911
> Fuel Filter & Accumulator Replacement
> Steering Bushing Replacement
> 911 Forum
PORSCHE BOXSTER TECH ARTICLES
> IMS Bearing Replacement
> Air / Oil Separator
> Coolant Flush
> Spark Plug and Coil Replacement
> Brake Pad Replacement
> Boxster Forum
PORSCHE 996 TECH ARTICLES
> Water Pump & Thermostat Replacement
> MAF Sensor Replacement
> Fuel Line Vent Valve
> Air Conditioning Maintenance
> Auto Transmission Fluid Replacement
> 996-997 Forum
CAYENNE TECH ARTICLES
> Blower Fan Replacement
> Fuel Pump & Filter Replacement
> Air Filter Replacement
> Hatch Shock Replacement
> Glove Box Catch Replacement
> Cayenne Forum
> View All Porsche Tech Articles
EXTRAS
> Classifieds
> Accessories
> Porsche Parts List
> Porsche Events
> Cars for Sale
HomeTech Articles > Fuchs Wheel Polishing

Guest Technical Article:

Wiper Arm Reversal
Difficulty Level: 3 Beers
Tom Sharpes
toms@pneudraulics.com

Editor's Note:  Although this article is written for a 911, the technique is very similar to the one used to reverse the 914s wiper location.

After listening to the pros and cons of reversing the wipers I decided to do mine only because I like the way they look and the clear view I have of the road. The following is a short pictorial of this project.

[Click on Image to Enlarge]

Before After Drivers View

Pull back the trunk carpet and remove the 4 bolts that secure the panel in front of the instruments.

Remove the hoses on the blower unit - you don't have to remove the control cables.

Move the blower unit to the side so you can access the under dash area and the wiper motor.

Locate the rotating arm f the wiper unit inside the protective U shaped bracket above the motor gear box.

Remove the nut and  pry the arm off of the shaft.

Rotate the wipers to the passenger side and reattach the arm to the

You are now ready to reassemble everything - in reverse order (so the saying goes). When you are ready to install the wipers you must swap the arms. The "bent" arm needs to be bent the opposite way. This is best performed in a vise and done very slowly. After bending the arm check in on the car and ensure the arms clear each other during operation.

Many thanks to the post on  Terry's 911 Web Site  by Bob Tindel (bob@pelicanparts.com). It makes it easier when you follow in someone else's footsteps.

  Loading Customer Comments...

Got more questions?  Join us in our Porsche Technical Forum Message Board, and ask a question to one of our many automotive experts
QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers
Copyright 2017 Pelican Parts Inc.
DMCA Registered Agent Contact Page