Pelican Parts
Volvo Parts Catalog Accessories Catalog Volvo How To Articles Volvo Tech Forums
Call Pelican Parts at 888-280-7799
View Recent Cars  |Shopping Cart Cart | Project List | Order Status | Help
 >  >
Outside Mirror Replacement
 
Bookmark and Share

Pelican Technical Article:

Outside Mirror Replacement

Jared Fenton

Time:

1 hour1 hr

Tab:

$200

Talent:

**

Tools:

T30 Torx driver, small pick

Applicable Models:

Volvo C30 T5 (2008-13)
Volvo C30 T5 R-Design (2008-13)

Parts Required:

Outside mirror assembly

Hot Tip:

Hold the mirror while you remove the last mounting screw

Complementary Modification:

Install custom outside mirror covers

In this article, I'll go over the steps involved with replacing the outside mirrors on your Volvo C30. This is a pretty easy job, but it does require removing the door panel first. See our article on Door Panel Removal for more information.

Shown here is the outside mirror assembly for the Volvo C30.
Figure 1

Shown here is the outside mirror assembly for the Volvo C30. Begin the project by removing the door panel on the inside. See our article on Door Panel Removal for more information.

Press the tab on the electrical connector (green arrow) going to the mirror assembly and pull it off.
Figure 2

Press the tab on the electrical connector (green arrow) going to the mirror assembly and pull it off. Also pull the plastic securing lug (yellow arrow) out of the door with a small pick.

Now loosen and remove the two T30 Torx screws (green arrows) holding the outside mirror to the door frame.
Figure 3

Now loosen and remove the two T30 Torx screws (green arrows) holding the outside mirror to the door frame.

Use a small pick to pry out the cover plug shown here (green arrow).
Figure 4

Use a small pick to pry out the cover plug shown here (green arrow).

Loosen and remove the T30 Torx screw underneath while also holding the mirror assembly to keep it from dropping on the ground.
Figure 5

Loosen and remove the T30 Torx screw underneath while also holding the mirror assembly to keep it from dropping on the ground.

Now simply remove the mirror.
Figure 6

Now simply remove the mirror. Make sure that the harness (green arrow) does not get caught on anything while pulling it through the access hole. Installation is the reverse of the removal.


Bookmark and Share

QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers
Page last updated: Tue 10/17/2017 02:51:35 AM