| Mercedes Benz CLS500 - Engine Miscellaneous - Page 2 |
Sensor - Knock/Ping |
| The Knock Sensor is used to inform the ignition computer of pre-ignition or detonation inside the cylinders, and adjust the timing curve accordingly. |
|
003-153-86-28-M14 | Knock Sensor, CLS500 M113.967- 2 per Car
Brand: Bosch [More Info] |  |
| $58.00 |  |
Position Sensor - Camshaft |
| Position Sender Unit (Camshaft Sensor), CLS500 M113.967- |
004-153-69-28-M14 | Position Sender Unit (Camshaft Sensor), CLS500 M113.967-
Brand: Bosch [More Info] | |
| $84.25 | |
| 004-153-69-28-M323 | Position Sender Unit (Camshaft Sensor), CLS500 M113.967-
Brand: FAE [More Info] | |
| $45.25 | |
Tools |
| If you are opting to save money by working on your car yourself, it is a very wise investment to have the proper tools. Some tasks may be nearly impossible to perform without the specific tool designed to assist you in the process. Don't cheap out - you're saving money by doing it yourself. Do it right with the right tools. Some tools may be special order, and may take a few days to be shipped out. |
|
| Flare Nut Wrench Set |
| Use the right tool for the job, whether it's replacing or tightening a solid fuel line or even changing out your fuel filter and check valve. Made from SK's high polish SuperKrome finish, that protects the tools from the harsh working environments found in today's workplace, while providing long life and maximum corrosion resistance |
|
TOL-SK376 | 6 Piece SuperKrome Metric Flare Nut Wrench Set [More Info] | $94.30 | |
TOL-SK378 | 6 Piece SuperKrome Metric 15 degree Offset Flare Nut Wrench Set [More Info] | $94.37 | |
| Telescoping Magnet |
| Ever drop a fastener down into the depths of your engine compartment, wishing you had something on hand to retrieve it. Your wish has come true! Heavy Duty powerful magnet, permanently attached to a chrome plated rod adjustable from 4.5" to a whopping 16" inches! |
|
| PEL-PP909899 | Telescoping Magnet [More Info] | No Longer Available | |
| Telescoping Rectangular Mirror |
| Find that pesky sheet metal screw that just fell into the abyss of your engine compartment. The rectangular mirror measures 2 inches by 3.5 inches, mounted on a sturdy chrome plated rod that adjusts from 6.75" to 12" inches. |
|
| PEL-PP909963 | Telescoping Rectangular Mirror [More Info] | $11.85 | |
| More Engine Tools |
Servicing and rebuilding an engine is not a simple task, so why try to get by with simple tools? Browse our extended selection of specialty tools by clicking on the links below to find the right tool that will save you hours of headache.
Engine Rebuilding Tools
Engine Specialty Tools
Engine Stands |
|
Engine Rebuild Materials |
| Using the proper materials is vital to leak-free engine. While there are many different combinations of materials that you can use, Wayne recommends the ones listed here. They have proven themselves to be worthy enough to stand the test of time, and provide years of leak-free service. |
|
| Loctite 574 Case Sealant |
| The Loctite 574 sealant is an orange gooey sealant that cures in the absence of air. When you assemble your case and mate the case halves, you will have some squeeze-out that will collect at the case halves. If you leave this excess sealant exposed to the air, you will find that it will not harden. While this may cause you some head scratching, you shouldn’t be concerned, as the sealant is designed to seal within tight clearances, and between metal surfaces. Despite the fact that it appears that the Loctite 574 is not curing because the squeeze-out has not hardened, it has in fact properly sealed between your two case halves. |
|
000-043-010-00-M258 | | $23.75 | |
