| BMW 2800CS 3.0CS - Clutch & Flywheel - Page 1 |
| Like practically everything else on your car, clutches and flywheels wear according to how they are operated - the harder you drive, the sooner it will need service. Flywheels may last longer than clutches, so be sure to have a reputable machinist resurface it if you plan to reuse it. Some drivers prefer heavier duty clutch assemblies for sporting applications, and we are happy to provide those upgrades as well. Keep in mind that stronger clutches may require more pedal effort and do not always last as long, so choose your clutch according to what your needs are. |
|
Pilot Bearing |
| The pilot bearing is used to center the mainshaft of the transmission in the flywheel assembly. Always replace this bearing whenever you remove the flywheel. |
|
| Pilot Bearing Ball Type 12 X 32 X 10, 2800 CS 3.0 CS |
11-21-1-468-742-M40 | Pilot Bearing Ball Type 12 X 32 X 10, 2800 CS 3.0 CS
Brand: INA [Photo] |  |
| $6.00 |  |
11-21-1-468-742-M92 | Pilot Bearing Ball Type 12 X 32 X 10, 2800 CS 3.0 CS
Brand: SKF [Photo] | |
| $7.75 | |
Flywheel Bolt |
| These bolts are used to secure the flywheel to the engine's crankshaft. Whenever the flywheel is removed, is it recommended you replace these bolts, as old bolts can stretch and lose strength if they are reused. |
|
11-22-0-616-143-M9 | Flywheel Bolt (12 X 22 mm), CS Coupe Auto Trans(8 Per Car)
Brand: Genuine BMW [Photo] | |
| $5.25 | |
| 11-22-7-805-885-M9 | Flywheel Bolt (12 X 28 mm), CS Coupe Manual Trans (8 Per Car)
Brand: Genuine BMW | |
| $3.50 | |
Clutch Kit |
| This kit contains all the needed parts required to replace the clutch assembly on your car. |
|
21-21-9-069-010-M38 | Clutch Kit Contains: (1) Disc (1) Pressure Plate (1) Release Bearing, 3.0CS (1974-76)
Brand: Sachs [Photo] | |
| $276.00 | |
Clutch Disc - Manual |
| The clutch disc is part of the clutch assembly. It is a friction disc the transfers power from the engine, through the clutch assembly, then to the transmission. |
|
21-21-1-223-125-M38 | Clutch Disc 240 mm, CS Coupe
Brand: Sachs [Photo] | |
| $94.50 | |
Clutch Pressure Plate |
| The pressure plate is used to mechanically engage or disengage the clutch disc from the engine's flywheel, allowing you to change gears. |
|
3082-007-333-M38 | Clutch Pressure Plate 240 mm, CS Coupe
Brand: Sachs [Photo] | |
| $139.50 | |
Clutch Release Bearing |
| This bearing is used along with the pressure plate to mechanically engage or disengage the clutch disc inside the clutch assembly. |
|
21-51-1-204-225-M38 | Clutch Release Bearing, CS Coupe thru '73
Brand: Sachs [Photo] | |
| $39.25 | |
| Clutch Release Bearing, CS Coupe from '74 |
21-51-1-223-366-M38 | Clutch Release Bearing, CS Coupe from '74
Brand: Sachs [Photo] | |
| $36.50 | |
21-51-1-223-366-M40 | Clutch Release Bearing, CS Coupe from '74
Brand: INA [Photo] | |
| $23.00 | |
Clutch Release Bearing Arm |
| Fork Lever for Clutch Release Bearing, CS Coupe from '74 |
21-51-1-204-229-M9 | Fork Lever for Clutch Release Bearing, CS Coupe from '74
Brand: Genuine BMW [Photo] | |
| $15.00 | |
21-51-1-204-229-M200 | Fork Lever for Clutch Release Bearing, CS Coupe from '74
Brand: MTC [Photo] | |
| $12.25 | |
