| BMW 2800CS 3.0CS - Axles & Bearings - Page 1 |
| The axle shaft assembly is the direct mechanical link that transfers power from the transaxle to the rear wheels. They are designed to allow the axle to continue transmitting power from the differential to the wheels when moving up and down by means of a flexible link called a constant velocity or CV joint. Over time, the bearings in these joints wear, causing the axle to eventually fail. A faulty bearing can make a grinding or clicking noise, may cause the vehicle to shake while driving, or even prevent the axle from turning at all. |
|
Axle Boot Kit |
| This kit contains the components you need to replace the C.V. boots on your car. If you have cracks or rips in your C.V. boots, it's recommended they be replaced as soon as possible to prevent the C.V. joint from locking up due to lack of lubrication. |
|
| 33-21-9-067-912-M203 | Axle Boot Kit for Rear Axle Inner/Outer C/V Joint (4 Per Car), CS Coupe
Brand: |  |
| $13.00 |  |
Cv Joint |
| The constant velocity joint or C.V. joint, allows power from the engine to be distributed to the wheels through varying degrees of rotation, For example, on a front wheel drive car, it allows power to be delivered to the wheels while the car is steered in |
|
33-21-1-205-840-M60 | Constant Velocity Joint for Axle Shaft, CS Coupe
Brand: Loebro [Photo] | |
| $84.50 | |
Drive Shaft Flex Disc |
| The flex disc is the connecting piece between the torque converter and the engine. |
|
| Flex Disc Output Flange to Driveshaft 12 mm Holes (Ribbed), 3.0CS Manual Transmission |
26-11-1-107-832-M155 | Flex Disc Output Flange to Driveshaft 12 mm Holes (Ribbed), 3.0CS Manual Transmission
Brand: Meyle [Photo] | |
| $20.50 | |
| 26-11-1-107-832-M200 | Flex Disc Output Flange to Driveshaft 12 mm Holes (Ribbed), 3.0CS Manual Transmission
Brand: MTC | |
| $32.50 | |
|
26-11-1-109-603-M57 | Flex Disc Output Flange to Driveshaft 12 mm Holes (Smooth) Automatic Transmission, 3.0CS
Brand: OEM [Photo] | |
| $51.50 | |
| Flex Disc Bolt |
|
26-11-1-107-834-M9 | Bolt for Driveshaft Flex Disc 12 X 70 mm (6 per car), 3.0 CS Manual Transmission
Brand: Genuine BMW [Photo] | |
| $3.25 | |
Driveshaft Center Support |
| The driveshaft support is used to hold and support the driveshaft from the transmission to the differential. |
|
26-11-1-206-502-M36 | Center Support with Bearing Assembly for Driveshaft, CS Coupe
Brand: Febi [Photo] | |
| $26.75 | |
U-Joint |
| Drive Shaft U-Joint, CS Coupe |
26-11-7-518-304-M155 | Drive Shaft U-Joint, CS Coupe
Brand: Meyle [Photo] | |
| $13.50 | |
| 26-11-7-518-304-M158 | Drive Shaft U-Joint, CS Coupe
Brand: | |
| $30.75 | |
Differential Lock Plate |
23-21-1-490-120-M9 | Lock Plate for Output Flange Nut on Manual Transmission and Differential Input Flange Nut, CS Coupe Getrag Transmission
Brand: Genuine BMW [Photo] | |
| $1.50 | |
Differential Mount |
| This mount is used to secure the rear-end differential to the vehicle's chassis. |
|
33-17-1-126-951-M69 | Differential Mount, CS Coupe
Brand: Lemfoerder [Photo] | |
| $79.00 | |
