| BMW 2800CS 3.0CS - Main Engine Components - Page 2 |
Flywheel Bolt |
| These bolts are used to secure the flywheel to the engine's crankshaft. Whenever the flywheel is removed, is it recommended you replace these bolts, as old bolts can stretch and lose strength if they are reused. |
|
11-22-0-616-143-M9 | Flywheel Bolt (12 X 22 mm), CS Coupe Auto Trans(8 Per Car)
Brand: Genuine BMW [Photo] |  |
| $5.25 |  |
| 11-22-7-805-885-M9 | Flywheel Bolt (12 X 28 mm), CS Coupe Manual Trans (8 Per Car)
Brand: Genuine BMW | |
| $3.50 | |
Pilot Bearing |
| The pilot bearing is used to center the mainshaft of the transmission in the flywheel assembly. Always replace this bearing whenever you remove the flywheel. |
|
| Pilot Bearing Ball Type 12 X 32 X 10, 2800 CS 3.0 CS |
11-21-1-468-742-M40 | Pilot Bearing Ball Type 12 X 32 X 10, 2800 CS 3.0 CS
Brand: INA [Photo] | |
| $6.00 | |
11-21-1-468-742-M92 | Pilot Bearing Ball Type 12 X 32 X 10, 2800 CS 3.0 CS
Brand: SKF [Photo] | |
| $7.75 | |
Crankshaft Seal Housing Gasket |
11-14-1-250-073-M42 | Gasket Rear Crankshaft Seal Housing, CS Coupe
Brand: Goetze [Photo] | |
| $1.00 | |
Crankshaft/Oil Pump Seal |
| This seal at the front and the rear of the crankshaft works to keep oil in the crankcase. |
|
| 11-14-1-715-100-M30 | Crankshaft Seal Front 42 X 62 X 12, CS Coupe
Brand: Elring Klinger | |
| $6.25 | |
| 11-14-2-193-237-M9 | Crankshaft Seal Rear 90 X 110 X 12 NOTE: High Performance BMW Motorsport Seal, CS Coupe
Brand: Genuine BMW [Photo] | |
| $98.50 | |
| Crankshaft Seal Rear 90 X 110 X 12, CS Coupe |
| 11-14-2-245-364-M17 | Crankshaft Seal Rear 90 X 110 X 12, CS Coupe
Brand: Victor Reinz | |
| $11.00 | |
11-14-2-245-364-M30 | Crankshaft Seal Rear 90 X 110 X 12, CS Coupe
Brand: Elring Klinger [Photo] | |
| $10.75 | |
|
11-14-2-249-533-M104 | Crankshaft Seal Rear 90 X 110 X 12 NOTE: This new style seal does not have a tension spring., CS Coupe
Brand: CFW-Freudenberg [Photo] | |
| $24.00 | |
Locating Dowel |
11-11-1-743-118-M9 | Locating Dowel 14.5 mm Diameter (Solid ring type), CS Coupe
Brand: Genuine BMW [Photo] | |
| $1.75 | |
11-11-2-245-180-M9 | Locating Dowel 14.5 mm Diameter (Split ring type), 2800 CS 3.0 CS
Brand: Genuine BMW [Photo] | |
| $1.75 | |
11-12-1-726-238-M9 | Locating Dowel 10.5 mm Diameter, CS Coupe
Brand: Genuine BMW [Photo] | |
| $1.75 | |
Tools |
| If you are opting to save money by working on your car yourself, it is a very wise investment to have the proper tools. Some tasks may be nearly impossible to perform without the specific tool designed to assist you in the process. Don't cheap out - you're saving money by doing it yourself. Do it right with the right tools. Some tools may be special order, and may take a few days to be shipped out. |
|
| Flare Nut Wrench Set |
| Use the right tool for the job, whether it's replacing or tightening a solid fuel line or even changing out your fuel filter and check valve. Made from SK's high polish SuperKrome finish, that protects the tools from the harsh working environments found in today's workplace, while providing long life and maximum corrosion resistance |
|
TOL-SK376 | 6 Piece SuperKrome Metric Flare Nut Wrench Set [Photo] | $72.50 | |
TOL-SK378 | 6 Piece SuperKrome Metric 15 degree Offset Flare Nut Wrench Set [Photo] | $79.00 | |
