Order Online or Call:  
888-280-7799  
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Search our site:   

View Cart  | Project List | Order Status |  Help    

 
- Back to Catalog -
Sender - Oil Pressure Gauge
Engine Oil Filter
Engine Oil Drain Plug
Oil Filter Housing Gasket
Oil Filter Canister 0-Ring
Oil Pump & Parts
Engine Oil Pump
Engine Oil Pump Sprocket Retainer
Engine Oil Pump Shim
Engine Oil Pump Chain
Oil Pump Sprocket
Engine Oil Filler Cap
Oil Pan Gasket
FilterMag
Oil System Tools
Super Oil Drain Pan/Storage Container
Flex-tube Oil Spout
Motor Oil & Additives
Lubro Moly Motor Oil
Lubro Moly Oil Additives and Cleaners
Swepco Motor Oil Additives
- Back to Catalog -
Home >  BMW 2800CS 3.0CS (1972-75)Engine >   BMW 2800CS 3.0CS - Oil Circulation  
BMW 2800CS 3.0CS - Oil Circulation - Page 2

Oil Pump & Parts

Engine Oil Pump Chain
The oil pump chain is used to mechanically drive the gears of the oil pump, causing oil to circulate throughout your engine and keeping vital components lubricated.

11-41-1-716-988-M48

Oil Pump Chain (46 Links), CS Coupe
   Brand: Iwis    [Photo]

$11.75
Oil Pump Sprocket

11-41-1-273-689-M77

Oil Pump Sprocket Late Style for Oil Pump with Splined Shaft NOTE: Also use- (1) 07 11 9 900 079 nut, CS Coupe
   Brand: Swag    [Photo]

$13.75

Engine Oil Filler Cap

This cap is used to cover the oil filler port.

11-12-1-468-054-M148

Engine Oil Filler Cap, CS Coupe
   Brand: Reutter  Original Equipment Manufacturer at the time of the vehicle's assembly    [Photo]

$4.50

Oil Pan Gasket

This gasket seals the oil pan to the engine block.

11-13-1-315-085-M17

Oil Pan Gasket (Engine), CS Coupe
   Brand: Victor Reinz    [Photo]

$5.50

FilterMag    Camera Pic

Snap one on today! FilterMAG achieves the next evolution in magnetic lubricant filtration. FilterMag's patented technology can withstand the force of oil flow and retains contaminants of all sizes, even smaller than 2 microns. Is 2 microns small? Normal table salt is 100 microns in size.

Your current oil filter can only trap particles that are 25 microns and larger. Every 2 1/2 seconds, one quart of oil flows through an engine's oil filter. Oil filter manufacturers don't want you to know that abrasive wear accounts for about 90% of failures due to contamination and 70% of all engine wear and sludge is caused by contaminants not trapped and held by your typical automotive oil filter.
The patented design of focusing rare earth magnet energy into an oil filter is very much like a laser focuses light. Depending on the filter size and usage FilterMAG focuses from 110 to over 1000 pounds of magnetic energy to the filter.

What is a rare earth magnet? All metallic elements with an atomic number between 57 and 71 are classified as rare earth. These rare earth magnets can produce more than 4,100 surface gauss in a tube magnet circuit compared to 1,000 and 2,000 gauss for standard Alnico and Ceramic magnet. (Gauss is a unit measuring electromagnetic force.) FilterMag's rare earth magnets are generally 5 to 10 times stronger than other magnetic filtration devices using Ceramic magnets. The newest generation of rare earth magnets consists of neodymium iron boron. (Neodymium is number 60 on the periodic table.)

What makes the FilterMAG system work? The FilterMAG's outer cover or flux band insures direct contact with the filter and by placing the magnet segments directly on the flux band, circuits the magnetism to drastically increases the magnetic energy by redirecting the power back into the oil filter and not back into the surrounding air. The heart of FilterMAG patented design system starts with unique precision ground and arced Neodymium magnets aligned in North and South series to generate the greatest amount of force to trap and hold metal particles out of the oil flow.

Just install the reusable FilterMAG on your new oil filter and consider FilterMAG as life insurance for your vehicle.

Industry tests found that removing particles 15 microns in size reduced abrasive wear by 70%. These tests also confirm that removal of particles down to 2 microns virtually stops the abrasion wear cycle. Isn't it time to make your oil filter really work?

BBFM-SS250

FilterMAG, 2.50 to 2.75 inch Filter Size, 110lbs pull force.     [Photo]

$35.75

BBFM-SS300

FilterMAG, 2.90 to 3.40 inch Filter Size, 150lbs pull force.    [Photo]

$47.95

BBFM-SS365

FilterMAG, 3.50 to 3.90 inch Filter Size, 275lbs pull force.     [Photo]

$49.95

BBFM-RA365

FilterMAG, 3.40 to 4.25 inch Filter Size, 525lbs pull force.     [Photo]

$143.92

BBFM-RA450

FilterMAG, 4.25 to 5.50 inch Filter Size, 1,000lbs pull force.     [Photo]

$173.00

Oil System Tools

You can never perform a good job on repairing your Porsche if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it!
Super Oil Drain Pan/Storage Container
This container can hold up to 15 quarts and includes a very tight lid that allows the pan to double as a storage container. Simply empty your oil, then stand it upright, and carry it off to your local recycling center. It really couldn't be any simpler.

PEL-PP801095

Super Oil Drain Pan    [Photo]

$15.00

  Page 2 of 3  <123>

        

  Search our site:   

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright © 2008, Pelican Parts Inc.