| BMW 840Ci - Cooling System Miscellaneous - Page 1 |
| Whether it's a specific type of hose clamp or a specialized tool, we aim to offer everything you need to get the job done right the first time. If you can't find what you need, then feel free to ask. We are always willing to help you out whenever we can. |
|
Heater Core |
| The heater core expels heat from the engine coolant through a series of pipes which are covered by a shroud connected to the heater motor. When air is blown through the heater core, the air is heated, then blown into the passenger compartment. |
|
64-11-8-372-523-M6 | Heater Core, 840Ci
Brand: Behr [Photo] |  |
| $172.00 |  |
Heater Pipe |
| 64-11-8-372-524-M6 | Heater Pipe from Heater Core to Inlet and Outlet Pipes, 840Ci
Brand: Behr | |
| $50.50 | |
Engine Cooling Fan Blade |
| The fan blade is mounted on the fan clutch and blows air through the radiator when the engine is running. |
|
11-52-1-712-110-M36 | Fan Blade 450 mm 11 Blade, 840Ci
Brand: Febi [Photo] | |
| $50.25 | |
Fan Clutch |
| The fan clutch is used to control the amount of air that blows through the radiator. When the engine reaches a certain speed, the fan clutch engages, causing the fan blade to spin, blowing air through the radiator. |
|
| Fan Clutch, 840Ci |
11-52-7-502-804-M6 | Fan Clutch, 840Ci
Brand: Behr [Photo] | |
| $96.25 | |
11-52-7-502-804-M179 | Fan Clutch, 840Ci
Brand: ACM [Photo] | |
| $85.50 | |
Radiator Air Duct Fastener |
07-12-9-925-731-M9 | Speed Nut for Air Ducts and Body Panels ST 4.8-11, 840Ci
Brand: Genuine BMW [Photo] | |
| $0.25 | |
Fan Shroud |
| The fan shroud is used to direct cooling air from the fan blade through the radiator. |
|
| 17-10-1-440-252-M6 | Fan Shroud for Radiator, 840Ci
Brand: Behr | |
| $61.00 | |
Water Accumulator Gasket |
11-53-1-731-833-M17 | Water Accumulator Gasket Rear of Engine (2 Per Car), 840Ci
Brand: Victor Reinz [Photo] | |
| $2.50 | |
Water Valve Vibration Damper |
| 64-11-1-390-940-M9 | Mount "Vibration Damper" for Water Valve, 840Ci (2 per car)
Brand: Genuine BMW | |
| $5.75 | |
Red Line Water Wetter  |
| An excellent additive for cooling systems, Water Wetter reduces coolant temperatures by as much as 30 degrees Fahrenheit. It can be added to new or old antifreeze to improve heat transfer in your cooling system. Water Wetter also reduces scale buildup in cylinder heads for better cooling and keeps water pump seals lubricated for longer life. It also provides excellent corrosion protection for your cooling system. 12 oz |
|
PEL-SW50189 | Red Line Water Wetter, 12 oz. [Photo] | $9.90 | |
