| BMW 840Ci - Oil Circulation - Page 2 |
Engine Crankcase Breather Hose |
| Breather hose is generally used to vent gases from the crankcase into the intake manifold resulting in lower exhaust emissions, and keeping oily film from building up on your engine. |
|
| 11-15-1-702-012-M9 | Crankcase Vent Pipe from rear Cover to Oil Separator Connector, 840Ci
Brand: Genuine BMW |  |
| $20.75 |  |
Oil Pump & Parts |
| Engine Oil Pump |
| The oil pump is responsible for circulating oil throughout your engine. |
|
| 11-41-1-438-280-M9 | Oil Pump, 840i thru 05/94 also use- (1) 11 41 1 742 625 (1) 11 41 1 745 258 (1) 11 41 7 508 400 (1) 11 15 1 742 631 (1) 07 11 9 905 949 840i from 06/94 also use- (1) 11 41 1 745 258 (1) 11 41 7 508 400 840Ci
Brand: Genuine BMW | |
| $397.00 | |
| Oil Pump Bolt |
|
| 11-41-7-508-400-M9 | Oil Pump Bolt 8 X 45 mm, 840Ci
Brand: Genuine BMW | |
| $1.25 | |
| Engine Oil Pump Sprocket Retainer |
|
| 11-41-1-745-258-M9 | Oil Pump Sprocket Nut, 840Ci
Brand: Genuine BMW | |
| $0.75 | |
| Engine Oil Pump Chain |
| The oil pump chain is used to mechanically drive the gears of the oil pump, causing oil to circulate throughout your engine and keeping vital components lubricated. |
|
| 11-41-1-729-136-M48 | Oil Pump Chain without Master Link, 840Ci
Brand: Iwis | |
| $15.25 | |
| Oil Pump Sprocket |
|
| 11-41-1-733-962-M9 | Oil Pump Sprocket, 840Ci
Brand: Genuine BMW | |
| $32.50 | |
Engine Oil Filler Cap |
| This cap is used to cover the oil filler port. |
|
| 11-12-1-743-294-M148 | Engine Oil Filler Cap with Oil Can Logo, 840Ci
Brand: Reutter | |
| $5.00 | |
| 11-12-7-509-328-M9 | Engine Oil Filler Cap NOTE: This oil cap is imprinted "BMW Recommends Castrol", 840Ci
Brand: Genuine BMW | |
| $9.50 | |
Crank Case Ventilation O-Ring |
| 07-11-9-906-360-M9 | O-Ring for Oil Seperator to Connector (2 Per Car), 840Ci
Brand: Genuine BMW | |
| $1.00 | |
| 11-15-1-736-140-M17 | O-Ring 20.0 X 3.55 mm for Rear Intake Manifold Cover, 840Ci
Brand: Victor Reinz | |
| $1.50 | |
| 11-15-1-747-978-M17 | O-Ring 16 X 3.55 for Intake Manifold Vent Pipe at Oil Separator, 840Ci
Brand: Victor Reinz | |
| $4.25 | |
11-61-1-745-195-M17 | O-Ring 12.5 X 2.0 mm for Intake Manifold Vent Pipe, 840Ci M62
Brand: Victor Reinz [Photo] | |
| $1.25 | |
