| BMW 760i - Engine Miscellaneous - Page 2 |
Tools |
| Telescoping Magnet |
| Ever drop a fastener down into the depths of your engine compartment, wishing you had something on hand to retrieve it. Your wish has come true! Heavy Duty powerful magnet, permanently attached to a chrome plated rod adjustable from 4.5" to a whopping 16" inches! |
|
| PEL-PP909899 | Telescoping Magnet | $8.85 |  |
| Telescoping Rectangular Mirror |
| Find that pesky sheet metal screw that just fell into the abyss of your engine compartment. The rectangular mirror measures 2 inches by 3.5 inches, mounted on a sturdy chrome plated rod that adjusts from 6.75" to 12" inches. |
|
| PEL-PP909963 | Telescoping Rectangular Mirror | $11.85 | |
| More Engine Tools |
Servicing and rebuilding an engine is not a simple task, so why try to get by with simple tools? Browse our extended selection of specialty tools by clicking on the links below to find the right tool that will save you hours of headache.
Engine Rebuilding Tools
Engine Specialty Tools
Engine Stands |
|
Engine Rebuild Materials |
| Using the proper materials is vital to leak-free engine. While there are many different combinations of materials that you can use, Wayne recommends the ones listed here. They have proven themselves to be worthy enough to stand the test of time, and provide years of leak-free service. |
|
| Loctite 574 Case Sealant |
| The Loctite 574 sealant is an orange gooey sealant that cures in the absence of air. When you assemble your case and mate the case halves, you will have some squeeze-out that will collect at the case halves. If you leave this excess sealant exposed to the air, you will find that it will not harden. While this may cause you some head scratching, you shouldnt be concerned, as the sealant is designed to seal within tight clearances, and between metal surfaces. Despite the fact that it appears that the Loctite 574 is not curing because the squeeze-out has not hardened, it has in fact properly sealed between your two case halves. |
|
000-043-010-00-M258 | Loctite 574 Case Sealant, 50ml bottle [Photo] |  |
| $23.50 | |
| Liqui Moly Anti-Seize Compound |
Anti-seize compound is used to help prevent galling of steel studs under extreme heat conditions. Studs that are particularly vulnerable to galling are the exhaust and head studs. I recommend using anti-seize on your head studs and exhaust studs during the rebuild process.
It is important to note that Porsche doesnt recommend the use of anti-seize compound on spark plugs, as detailed in Porsche Technical Bulletin 9102, Group 2, identifier 2870. The bulletin applies retroactively to all Porsche models and the theory is that the anti-seize tends to act as an electrical insulator between the plug and the cylinder head. This could have detrimental effect on the firing of the spark due to the loss of a good, consistent ground connection. |
|
2012-M19 | Liqui Moly Anti-seize Compound, 100g [Photo] | |
| $9.00 | |
| Loctite RTV Black Silicone |
| Black Loctite high-temp silicone is useful for sealing the small o-rings on the case through-bolts. The black color will blend in easily with your case, and will provide added protection against leaks at this interface. |
|
| 37460-M258 | Loctite RTV Black Silicone, 80 ml tube [Photo] | |
| $3.50 | |
| Curil-T Sealant |
| Curil-T is a good, thin sealant that I use as an extra precaution against oil leaks when installing some seals. You will want to spread it around on a few of the seals and gaskets during the rebuild process. |
|
PEL-246948 | Curil-T Sealant, 75 ml tube
Brand: Elring Klinger [Photo] | $10.10 | |
| JB Weld |
| There are several spots on the case where an original bonding/sealing agent was placed. These are the places where a factory dowel pin or plug has been inserted into the case. JB Weld is an excellent heavy-duty epoxy that can be used to replace the dabs of factory epoxy that help seal some of these areas of the case and chain housings. |
|
PEL-JB8265 | JB Weld [Photo] | $5.95 | |
