| BMW 750iL - Main Engine Components - Page 1 |
| If you're this far into your engine, then we think you know what you're doing. You also probably know that the best parts to use are OEM quality parts that already lasted this long. The stronger your bottom end, the stronger everything else can be, so don't skimp on these core components. |
|
Connecting Rod Bolt |
| These bolts hold the two pieces of the connecting rod together. Always replace these nuts when you are doing an engine rebuild. |
|
 11-24-1-744-319-M9 | Connecting Rod Bolt Length 47 mm, 750iL (24 Per Car) Brand: Genuine BMW [Photo] |  |
| $8.50 |  |
Flywheel Bolt |
| These bolts are used to secure the flywheel to the engine's crankshaft. Whenever the flywheel is removed, is it recommended you replace these bolts, as old bolts can stretch and lose strength if they are reused. |
|
| 11-22-7-805-885-M9 | Flywheel Bolt (12 X 28 mm), 750iL Auto Trans(9 Per Car) Brand: Genuine BMW |  |
| $3.50 |  |
Crankshaft Seal Housing Gasket |
 11-14-1-736-521-M17 | Gasket Rear Crankshaft Seal Housing, 750iL Brand: Victor Reinz [Photo] |  |
| $0.75 |  |
Crankshaft/Oil Pump Seal |
| This seal at the front and the rear of the crankshaft works to keep oil in the crankcase. |
|
 11-14-1-710-247-M104 | Crankshaft Seal Rear 100 X 125 X 13, 750iL Brand: CFW-Freudenberg [Photo] |  |
| $43.50 |  |
| 11-14-1-725-994-M42 | Crankshaft Seal Front 55 X 72 X 10, 750iL Brand: Goetze |  |
| $16.50 |  |
Locating Dowel |
 11-11-1-743-118-M9 | Locating Dowel 14.5 mm Diameter (Solid ring type), 750iL Brand: Genuine BMW [Photo] |  |
| $1.75 |  |
 11-12-1-726-238-M9 | Locating Dowel 10.5 mm Diameter, 750iL Brand: Genuine BMW [Photo] |  |
| $1.75 |  |
 11-12-1-726-241-M9 | Locating Dowel 12.5 mm Diameter, 750iL Brand: Genuine BMW [Photo] |  |
| $1.75 |  |
 11-12-1-726-242-M9 | Locating Dowel 8.5 mm Diameter, 750iL Brand: Genuine BMW [Photo] |  |
| $1.25 |  |
Tools |
| If you are opting to save money by working on your car yourself, it is a very wise investment to have the proper tools. Some tasks may be nearly impossible to perform without the specific tool designed to assist you in the process. Don't cheap out - you're saving money by doing it yourself. Do it right with the right tools. Some tools may be special order, and may take a few days to be shipped out. |
|
| Flare Nut Wrench Set |
| Use the right tool for the job, whether it's replacing or tightening a solid fuel line or even changing out your fuel filter and check valve. Made from SK's high polish SuperKrome finish, that protects the tools from the harsh working environments found in today's workplace, while providing long life and maximum corrosion resistance |
|
 TOL-SK376 | 6 Piece SuperKrome Metric Flare Nut Wrench Set [Photo] | $72.50 |  |
 TOL-SK378 | 6 Piece SuperKrome Metric 15 degree Offset Flare Nut Wrench Set [Photo] | $79.00 |  |