| BMW 750iL - Cylinder Head & Valvetrain - Page 1 |
| The cylinder head and valvetrain is a magnificent assembly that combines precisely engineered mechanisms with intricately designed aerodynamics. If, for some reason, a valve spring breaks, the head gasket fails, or a timing belt has snapped, major damage would be inflicted onto the entire motor. When rebuilding the top end assembly of a motor, not only do you need brand new quality parts to get the job done right, but also a reputable machinist to do the work that you can't in your own garage. Be sure to be patient when working on the valvetrain and take all the time you need to build it to your desired specifications. |
|
Engine Valve Cover Gasket |
11-12-1-725-002-M208 | Valve Cover Gasket Right Side Cylinders 1-6, 750iL
Brand: Gloeckler [Photo] |  |
| $24.75 |  |
11-12-1-725-003-M208 | Valve Cover Gasket Left Side Cylinders 7-12, 750iL
Brand: Gloeckler [Photo] | |
| $25.25 | |
Valve Cover Hardware |
| Valve Cover Nut |
| Used to secure the valve cover to the cylinder head. |
|
11-61-7-549-043-M9 | Valve Cover Cap Nut "Acorn Nut", 750iL M73 (16 Per Car)
Brand: Genuine BMW [Photo] | |
| $4.50 | |
Head Gasket |
| The Cylinder Head gasket is used to seal the cylinder head to the engine block and is also used to keep coolant from leaking into the cylinder. It's recommended that you have your head re-surfaced when you use a new head gasket to ensure proper sealing. |
|
11-12-1-702-082-M17 | Head Gasket for Cylinders 1-6 NOTE: Also use- (1) 11 14 1 725 700 chain case gasket, 750iL
Brand: Victor Reinz [Photo] | |
| $30.50 | |
11-12-1-702-083-M17 | Head Gasket for Cylinders 7-12 NOTE: Also use- (1) 11 14 1 725 703 chain case gasket, 750iL
Brand: Victor Reinz [Photo] | |
| $33.75 | |
| Head Gasket Set |
| This gasket set includes the various seals and gaskets needed to attach the head to the engine block. |
|
| 11-12-9-068-137-M42 | Head Gasket Set NOTE: Head gaskets and intake blocks are not included in set., 750iL
Brand: Goetze | |
| $241.00 | |
Cylinder Head Hardware |
| Cylinder Head Bolt Set |
| This set includes all the bolts needed when replacing a cylinder head. Since cylinder head bolts can stretch, we recommend that you replace the head bolts every time the head is removed. |
|
11-12-1-729-247-M17 | Cylinder Head Bolt Set (14 Bolts Per Set) (2 Per Car), 750iL
Brand: Victor Reinz [Photo] | |
| $28.50 | |
| Cylinder Head Grommet |
|
11-15-1-702-292-M9 | Valve Cover Grommet "Rubber Boot" (2 Per Car), 750iL
Brand: Genuine BMW [Photo] | |
| $22.00 | |
Valve Guide |
| The valve guide keeps the intake or exhaust valve lubricated inside the cylinder head. |
|
09-0387-860-M105 | Valve Guide I.D. 7 mm (12.56 mm), 750iL (24 Per Car)
Brand: Canyon [Photo] | |
| $6.00 | |
