| BMW 750iL - Cylinder Head & Valvetrain - Page 2 |
Engine Intake Valve |
| The intake valve is used to allow the fuel/air mixture to enter the cylinder during the intake stroke. It is a good idea to use new valves if you are rebuilding the cylinder head. |
|
| 11-34-1-727-358-M154 | Intake Valve 42 mm (7 mm Stem) (12 Per Car), 750iL
Brand: Intervalves |  |
| $7.00 |  |
Engine Exhaust Valve |
| The exhaust valve is used to expel exhaust gases from the engine during the exhaust stroke. It is a good idea to use new valves if you are rebuilding the cylinder head. |
|
| 11-34-1-727-352-M154 | Exhaust Valve 36 mm (7 mm Stem) (12 Per Car), 750iL from 04/90
Brand: Intervalves | |
| $13.75 | |
Valve Guide |
| The valve guide keeps the intake or exhaust valve lubricated inside the cylinder head. |
|
| 09-0387-860-M105 | Valve Guide I.D. 7 mm (12.56 mm), 750iL (24 Per Car)
Brand: Canyon | |
| $6.00 | |
Engine Valve Keeper |
| The valve keepers are the small pieces that keep the valve from dropping into the cylinder. |
|
| 11-34-1-307-136-M80 | Valve Keeper for 7 mm Valve Stems, 750iL (48 Per Car)
Brand: TRW | |
| $1.00 | |
Valve Stem Seal Kit |
| This kit contains the parts needed to replace the valve stem seals in your car's engine. |
|
| 11-34-9-059-172-M30 | Valve Stem Seal Kit, 750iL (2 Kits Per Car)
Brand: Elring Klinger | |
| $9.50 | |
Engine Valve Lifter |
| 11-33-1-712-010-M40 | Hydraulic Valve Lifter for Intake/Exhaust Valves, 750iL (24 Per Car)
Brand: INA | |
| $15.50 | |
Engine Rocker Arm |
| The rocker arm is used to actuate the opening of either the intake or exhaust valve. It is essentially a pivot operated by either the camshaft lobe or a pushrod |
|
| 11-33-1-709-063-M36 | Rocker Arm (24 per car), 750iL
Brand: Febi | |
| $29.75 | |
Tools |
| If you are opting to save money by working on your car yourself, it is a very wise investment to have the proper tools. Some tasks may be nearly impossible to perform without the specific tool designed to assist you in the process. Don't cheap out - you're saving money by doing it yourself. Do it right with the right tools. Some tools may be special order, and may take a few days to be shipped out. |
|
| Flare Nut Wrench Set |
| Use the right tool for the job, whether it's replacing or tightening a solid fuel line or even changing out your fuel filter and check valve. Made from SK's high polish SuperKrome finish, that protects the tools from the harsh working environments found in today's workplace, while providing long life and maximum corrosion resistance |
|
TOL-SK376 | 6 Piece SuperKrome Metric Flare Nut Wrench Set [Photo] | $72.50 | |
TOL-SK378 | 6 Piece SuperKrome Metric 15 degree Offset Flare Nut Wrench Set [Photo] | $79.00 | |
