| BMW 740i 740i 740iL 740iL - Cylinder Head & Valvetrain - Page 2 |
Head Gasket |
| The Cylinder Head gasket is used to seal the cylinder head to the engine block and is also used to keep coolant from leaking into the cylinder. It's recommended that you have your head re-surfaced when you use a new head gasket to ensure proper sealing. |
|
11-12-1-433-473-M17 | Head Gasket Right Side Cylinders 1-4 (1.74 mm), 740i, iL M62 from 09/97
Brand: Victor Reinz [Photo] |  |
| $51.00 |  |
11-12-1-433-477-M17 | Head Gasket Left Side Cylinders 5-8 (1.74 mm), 740i, iL M62 from 09/97
Brand: Victor Reinz [Photo] | |
| $49.25 | |
11-12-1-736-317-M42 | Head Gasket Right Side Cylinders 1-4 (1.74 mm), 740i, iL M60
Brand: Goetze [Photo] | |
| $49.25 | |
11-12-1-736-318-M42 | Head Gasket Left Side Cylinders 5-8 (1.74 mm), 740i, iL M60
Brand: Goetze [Photo] | |
| $51.50 | |
| 11-12-1-741-468-M42 | Head Gasket Right Side Cylinders 1-4 (1.74 mm), 740i, iL M62 thru 08/97
Brand: Goetze | |
| $57.25 | |
11-12-1-741-470-M42 | Head Gasket Left Side Cylinders 5-8 (1.74 mm), 740i, iL M62 thru 08/97
Brand: Goetze [Photo] | |
| $57.25 | |
| Head Gasket Set |
| This gasket set includes the various seals and gaskets needed to attach the head to the engine block. |
|
| Head Set Gaskets for Cylinder Head NOTE: Head gaskets are not included in set., 740i, iL M62 from 09/98 |
11-12-0-004-553-M17 | Head Set Gaskets for Cylinder Head NOTE: Head gaskets are not included in set., 740i, iL M62 from 09/98
Brand: Victor Reinz [Photo] | |
| $222.50 | |
| 11-12-0-004-553-M42 | Head Set Gaskets for Cylinder Head NOTE: Head gaskets are not included in set., 740i, iL M62 from 09/98
Brand: Goetze | |
| $229.75 | |
|
| 11-12-1-736-906-M17 | Head Set NOTE: Head gaskets are not included in set., 740i, iL M60
Brand: Victor Reinz | |
| $216.75 | |
11-12-9-069-055-M17 | Head Gasket Set NOTE: Head gaskets are not included in set., 740i, iL M62 thru 08/98
Brand: Victor Reinz [Photo] | |
| $234.25 | |
Cylinder Head Hardware |
| Cylinder Head Bolt Set |
| This set includes all the bolts needed when replacing a cylinder head. Since cylinder head bolts can stretch, we recommend that you replace the head bolts every time the head is removed. |
|
| 11-12-1-729-246-M17 | Cylinder Head Bolt Set (10 Bolts Per Set) (2 Per Car), 740i, iL
Brand: Victor Reinz | |
| $19.00 | |
| Cylinder Head Washer |
| These washers are used with the cylinder head bolts. Always use new washers and bolts when re-installing the cylinder head to prevent broken bolts or incorrect torque settings. |
|
| 11-12-7-550-856-M9 | Cylinder Head Washer for Cylinder Head Bolts, 740i,iL (20 Per Car)
Brand: Genuine BMW | |
| $0.75 | |
Engine Intake Valve |
| The intake valve is used to allow the fuel/air mixture to enter the cylinder during the intake stroke. It is a good idea to use new valves if you are rebuilding the cylinder head. |
|
11-34-1-435-480-M154 | Intake Valve 35.0 mm (6 mm Stem) (16 Per Car), 740i, iL
Brand: Intervalves [Photo] | |
| $13.75 | |
Engine Exhaust Valve |
| The exhaust valve is used to expel exhaust gases from the engine during the exhaust stroke. It is a good idea to use new valves if you are rebuilding the cylinder head. |
|
11-34-1-435-482-M154 | Exhaust Valve 30.5 mm (6 mm Stem) (16 Per Car), 740i, iL
Brand: Intervalves [Photo] | |
| $23.75 | |
