| BMW 740i 740iL - Oil Circulation - Page 4 |
Oil System Tools |
| You can never perform a good job on repairing your Porsche if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
|
| Super Oil Drain Pan/Storage Container |
| This container can hold up to 15 quarts and includes a very tight lid that allows the pan to double as a storage container. Simply empty your oil, then stand it upright, and carry it off to your local recycling center. It really couldn't be any simpler. |
|
PEL-PP801095 | Super Oil Drain Pan [Photo] | $15.00 |  |
| Flex-tube Oil Spout |
| One of the neatest products around is the Flex-tube Oil Spout. This tube attaches to most containers and allows you to accurately position the mouth of the tube exactly where you want it to be located. |
|
PEL-PM883056 | Flex-tube Oil Spout [Photo] | $6.85 | |
Motor Oil & Additives |
| Lubro Moly Motor Oil |
| The Lubro Moly Voll-Synthese 5W-40W motor is a fully synthetic oil that provides maximum lubrication while minimizing friction, even under extreme operating conditions. With a wide viscosity spectrum, the Voll-Synthese is best suited for long term use, and infrequent oil changes. Made in Germany for the essential German purist. Or try the anti-friction motor oil. Based on hydrocrack technology (no jokes here), this oil includes extra additives to reduce the friction surfaces in your engine. Extends time between oil changes. |
|
| PEL-LMVS-1 | Voll-Synthese 5W-40W Motor Oil, 5 Liter Container [Photo] | No Longer Available | |
| PEL-LM-2 | Anti-Friction 10W-40 Motor Oil, 5 Liter Container | No Longer Available | |
| Lubro Moly Oil Additives and Cleaners |
| Lubro Moly MotorProtect Engine Treatment. Fully synthetic oil additive. It significantly reduces wear. High pressure wear protection additives form a very thin film on all mating partners in the engine, that is compliant and very slippery under wear conditions. The film lasts up to 50.000 km. This results in the following advantages: Significant wear reduction, Longer engine life, Reduction of fuel consumption and pollutant levels thanks to the anti-friction effect, Superior engine performance, quiet operation. For more information, see the Liqui-Moly Website. |
|
| 2053-M19 | Lubro Moly Motor Protect Engine Treatment, 500ml bottle [Photo] |  |
| $30.00 | |
| Lubro Moly MotorClean Engine Treatment. Scrubs and cleans the engine from inside. The highly effective detergent additives loosen sludge and lacquer deposits and keep solid and liquid contaminants in suspension. At the oil change they are drained out with the used oil. After an oil change thus prepared, the fresh oil develops its full potential: the engine regains its full power. It runs with less wear. The exhaust gas performance is improved. Oil starvation is prevented. |
|
| 2052-M19 | Lubro Moly Motor Clean Engine Treatment, 500ml bottle [Photo] | No Longer Available | |
| Lubro Moly MO2 Motor Oil Friction Treatment. The anti-friction lubricant MoS2 forms a highly load-resistant lubricating film on all rubbing and sliding surfaces. It reduces friction and guarantees easier running of the engine. As a result there are the following advantages: significant reductions in fuel and oil consumption, scientifically proven wear reduction of more than 50%, fewer break-downs, and emergency running properties. Tested for catalytic converters and turbochargers. |
|
2009-M19 | Lubro Moly M02 Motor Oil Friction Treatment, 300ml/can [Photo] | |
| $8.25 | |
| Lubro Moly MO2 Transmission Friction Treatment. An additive specially developed for manual gearboxes, differentials, and steering units with oil bath. It reduces wear significantly and lowers peak operating temperatures: quieter operation, easier shifting, better running in. The gearbox runs quietly and warms up less. Even older gearboxes regain running smoothness and performance thanks to the "repair" of the gear surfaces. Increases operating safety and provides emergency running properties through the MoS2. |
|
2019-M19 | Lubro Moly MO2 Transmission Friction Treatment, 50g [Photo] | |
| $11.00 | |
| Swepco Motor Oil Additives |
Swepco brand lubricants are the world's most technologically advanced lubricants, with exacting formulations specifically designed for harsh industrial environments. Because Swepco lubricants are specially formulated for commercial equipment operating in the most severe service conditions, our lubricants also provide outstanding performance for automotive and racing use. Turn to Swepco for lubrication solutions for the most demanding automotive applications. For more information, see the Swepco USA Website.
Click here to browse all Swepco Lubricants! |
|
| Swepco 502 Oil Improver. An engine oil improver designed to improve and fortify any crankcase oil's performance in gasoline or diesel engines. Special solvent eliminates sticking and clattering of hydraulic valve lifters. Contains friction modifiers, Micronized Moly, and a complex blend of additives. Neutralizes acid, dissolves gum and varnish formations. Protects engines against friction, reduces heat and wear. Helps eliminate sticking valve lifters and reduces hydraulic lifter noise. Reduces oil consumption and Extends engine life. |
|
PEL-SWP502 | Swepco 502 Oil Improver [Photo] | $11.20 | |
| Swepco 505 Oil Additive. Swepco 505 is an oil improver designed for use in both gasoline and diesel engines to eliminate friction, wear and to improve fuel efficiency. Contains DIMONYL and organic Moly which plates all vital metal surfaces with a friction reducing film. Highly effective as an anti-oxidant additive. Increases chemical and thermal stability of any oil. Protects expensive turbochargers. Reduces friction and engine wear which lowers operating temperatures and improves the fuel efficiency of the engine. Superior protection for turbo chargers. Improves high temperature performance of engine oils and extends engine life. |
|
PEL-SWP505 | Swepco 505 Oil Additive [Photo] | $19.45 | |
