| BMW 735i 735iL - Cylinder Head & Valvetrain - Page 1 |
| The cylinder head and valvetrain is a magnificent assembly that combines precisely engineered mechanisms with intricately designed aerodynamics. If, for some reason, a valve spring breaks, the head gasket fails, or a timing belt has snapped, major damage would be inflicted onto the entire motor. When rebuilding the top end assembly of a motor, not only do you need brand new quality parts to get the job done right, but also a reputable machinist to do the work that you can't in your own garage. Be sure to be patient when working on the valvetrain and take all the time you need to build it to your desired specifications. |
|
Engine Valve Cover Gasket |
| Valve Cover Gasket, 735i, iL |
11-12-1-730-231-M17 | Valve Cover Gasket, 735i, iL
Brand: Victor Reinz [Photo] |  |
| $9.25 |  |
11-12-1-730-231-M30 | Valve Cover Gasket, 735i, iL
Brand: Elring Klinger [Photo] | |
| $14.50 | |
Valve Cover Hardware |
| Valve Cover Nut |
| Used to secure the valve cover to the cylinder head. |
|
11-61-7-549-043-M9 | Valve Cover Cap Nut "Acorn Nut", 735i,iL (8 Per Car)
Brand: Genuine BMW [Photo] | |
| $4.50 | |
Head Gasket |
| The Cylinder Head gasket is used to seal the cylinder head to the engine block and is also used to keep coolant from leaking into the cylinder. It's recommended that you have your head re-surfaced when you use a new head gasket to ensure proper sealing. |
|
11-12-1-730-223-M30 | Head Gasket (1.72 mm), 735i, iL
Brand: Elring Klinger [Photo] | |
| $63.00 | |
11-12-1-730-224-M30 | Head Gasket +0.3 mm (2.07 mm), 735i, iL
Brand: Elring Klinger [Photo] | |
| $106.50 | |
| Head Gasket Set |
| This gasket set includes the various seals and gaskets needed to attach the head to the engine block. |
|
| Head Gasket Set, 735i, iL |
| 11-12-9-059-238-M17 | Head Gasket Set, 735i, iL
Brand: Victor Reinz | No Longer Available | |
| 11-12-9-059-238-M30 | Head Gasket Set, 735i, iL
Brand: Elring Klinger | |
| $113.50 | |
Cylinder Head Hardware |
| Cylinder Head Bolt |
| These bolts hold the cylinder head on the engine block. It's recommended that you replace the cylinder head bolts whenever the head is removed. Cylinder head bolts can stretch when torqued so re-using old ones can result is incorrect torque settings when r |
|
11-12-0-621-144-M17 | Cylinder Head Bolt, 735i, iL (14 Per Car)
Brand: Victor Reinz [Photo] | |
| $3.25 | |
Cylinder Head & Parts |
| Cylinder Head Cover Plate Gasket |
| 11-12-1-726-725-M17 | Gasket Rear Cover Plate on Cylinder Head, 735i, iL
Brand: Victor Reinz | |
| $1.00 | |
Engine Intake Valve |
| The intake valve is used to allow the fuel/air mixture to enter the cylinder during the intake stroke. It is a good idea to use new valves if you are rebuilding the cylinder head. |
|
| 11-34-1-705-560-M154 | Intake Valve 47 mm (8 mm Stem) (6 Per Car), 735i, iL
Brand: Intervalves | |
| $18.00 | |
