Order Online or Call:  
888-280-7799  
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Search our site:   

View Cart  | Project List | Order Status |  Help    

Home > Tools > Pullers & Installers >  Miscellaneous

Ford Hubtamer Adapter
Manufacturer: OTC DIVISION OF SPX CORP    Click here to visit the manufacturer's home page ... more...  

Door Post Puller/Twister $43.75
Designed to put a twist in your pull with its V-shaped gusset. There are three positions from which to pull. For use on bolt-type hinge pillars. Specifications: Overall length: 5 1/4”... more...  

3 Jaw Puller 1-Ton $58.00
Specifications: Maximum Reach: 2-1/8" Maximum Spread: 3-1/4" Weight: 8 oz. Manufacturer: OTC DIVISION OF SPX CORP    Click here to visit the manufacturer's home page ... more...  

Slide Hammer Puller Set
• Eases removal of flange-type axles, oil seals, bearings and other press fit parts • Jaws can be set up for 2 or 3 jaw internal or external pulling jobs • Heavy-duty steel carrying case... more...  

GM Steering Wheel Puller Legs $16.00
Use in conjunction with the SER 2291 Steering Wheel Puller to remove steering wheels on late model GM vehicles that are not pre-drilled to receive standard bolts. Applications Include:... more...  

Steering Wheel Puller $17.25
Removes steering wheels on most domestic and imported vehicles, with or without telescoping steering columns. Five sets of cap screws are included for the various thread requirements. ... more...  

1"To 2-3/8" Freeze Plug Installer/Remover $69.50
Manufacturer: OTC DIVISION OF SPX CORP    Click here to visit the manufacturer's home page ... more...  

Diesel Glow Plug Removal Tool $115.00
• Removes damaged, stuck-in glow plugs of diesel engines without having to remove cylinder head. Saves hours of service time! • When glow plug tip is melted and plug cannot be removed without... more...  

Transmission Clutch Spring Compressor $122.25
Tool compresses automatic-transmission clutch springs on some GM, Ford, Toyota and other transmissions. It permits easy removal and installation of snap rings. Job can be completed without... more...  

Pipe Expander $30.25
• Removes clamp grooves and round out pipes. Practical, rugged tool that make easy work of a tough job. • Works with wrench or impact tool • Fits 1-5/8" to 2-7/16" Manufacturer: LISLE  ... more...  

Hi-Temp Dyno Pipe Adapter $45.75
• accommodates up to a 3" O.D. tailpipe • Higher temp resistance than standard Crushproof exhaust adapters • Includes chain and hook • 3-1/2" I.D. x 15" long • Threads into 4" hose • Probe... more...  

Pitman Arm Puller $25.75
The No. 7314 Pitman arm puller is designed to handle the toughtest Pitman arm pulling jobs on passenger cars and light trucks. This puller features special forged jaws shaped to fit the... more...  

Steer-Wheel Lock-Plate Remover $17.00
Depresses lock plate to allow easy removal and re-assembly of snap ring. Tool is a must for servicing turn signals, ignition switches and steering locks built into the steering column.... more...  

5-Ton Bar Puller/Bearing Separator Set $92.25
This combination set includes our two most popular bearing “splitters” (2" and 3"), four sets of hex push-puller legs and a bar-type puller head with a 9/16" forcing screw. Separator tools... more...  

Flange Type Puller Combo $77.50
Two specialty pullers in one box. You get a flange-type puller for removal of harmonic balancers, timing gears, and other parts with two or three tapped holes. You also get a steering... more...  

Pitman Arm Puller $25.75
The No. 7314 Pitman arm puller is designed to handle the toughtest Pitman arm pulling jobs on passenger cars and light trucks. This puller features special forged jaws shaped to fit the... more...  

Steering Wheel Lock Plate Remover
Compresses the steering wheel lock plate to remove or install the snap ring. Needed for accessing the turn signal switch and S.I.R. modules on current GM vehicles. Also works on older... more...  

10-Ton Push Puller $134.25
Can be used with OTC 1123 bearing puller attachment, 679 pulley pulling attachment, 1150, 1151, 1152, 1153 internal pulling attachments Manufacturer: OTC DIVISION OF SPX CORP   ... more...  

20-Ton Push Puller $247.25
• Removes and installs press-fit parts. • Can be used with Nos. 1124 and 1130 bearing pulling attachments, or Nos. 679 and 680 pulley pulling attachments. May also be used with Nos. 1150... more...  

Hub Puller Leg $35.75
• Includes 1 puller leg Manufacturer: OTC DIVISION OF SPX CORP    Click here to visit the manufacturer's home page ... more...  

Oil/Grease Seal Puller Double Sided Hook Tip $10.50
• Designed to remove oil and grease seals when servicing cars, SUVs and light trucks without damaging the housing or bearing. • Hook tips in two sizes and professional handle design allows... more...  

Blind Hole Puller Set 3/8" to 1.25" $142.25
• For pulling jobs requiring an internal pull, such as pilot bearings. • Set includes four collets which fit a wide range of applications. Select the appropriate sized collet by comparing... more...  

        

 
  Search our site:   

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright © 2009, Pelican Parts Inc.