Pelican Parts - Product Information: PEL-TOL-P224

Related Technical Articles:

911 Clutch Cable and Helper Spring Replacement

You should always replace your clutch cable and helper spring prior to performing a clutch job, as the cable often wears out, and could be causing some of your clutch problems. Also covers clutch adjustment.

911 Clutch Replacement

One of our most requested, here is the low-down on how to replace your own clutch in your 901 or 915 equipped 911.

911 Factory Short Shift Kit Install

Bob Tindel offers his usual-excellent approach to installing the factory short-shift kit into your car.

911 G50 Clutch Replacement

Carreras with G50 transmissions need their clutches maintained too! Learn how in this step-by-step article by Jim Smolka.

911 Shifting Improvements

Tired of sloppy shifting in your 911? Try a few of these small suggestions for improving your shift linkage setup.

Full-On 901 Synchro Change!

Rebuilding your transmission might be easier that you think! In this article, Red-Beard goes through a complete, step-by-step teardown of a 901 transmission.

Installing the 911 Factory Short Shift Kit

Here's a step-by-step instruction set on how to install the 911 Factory Short Shift Kit, brought to you by Scott Booth.

Repairing 1st Gear on the 901 Transmission

It's almost typical to have a 901 that crunches or is difficult to get into first gear. The repair is relatively easy, if you have all the right parts.

Click here to see more related articles...

Shifter Rod Seal Replacement

Joe Wolfgang and Wayne team up to offer you an easy solution for replacing your transmission shift rod seal.

Transmission Final Drive Computer

Here is a little program John Rogers wrote to do some speed vs RPM calculations after he did a rally a couple of months ago. It's pretty fun to play around with.

Transmission Gear Ratios

Figure out the exact ratios that you need to figure out for your Porsche with Andrew Warren's 901 & 915 spreadsheets.

Transmission Synchro Tools

Grinding your teeth worrying about your transmission? If you are planning on repairing some grinding gears, then these synchro hub removal tools make this process a breeze. If you have ever attempted this task without these tools, then you will know first-hand how valuable they are. All of these tools are specifically designed to remove the synchro hubs and rings from their respective gears.

Synchro Hub Removal Tool

This tool helps you to remove the synchro hubs (dog teeth) from the gear sets. Without it, you may need to cut off the synchro hub from the gear. Note: not to be used to remove the neighbor's dog's teeth from your ankle.

Kit Parts:

There are no kits associated with this part.

Write a Review: PEL-TOL-P224

Review title:

Overall rating:

How long have you owned this product?

Comments:
(Please give a detailed description of what you liked or disliked about this product)
(2,500 characters max)

Your nickname:

Upload a Photo:

* I have read and agree to abide by the Product Review Guidelines.