Pelican Parts - Product Information: PEL-SIR-P225

Related Technical Articles:

911 Clutch Cable and Helper Spring Replacement

You should always replace your clutch cable and helper spring prior to performing a clutch job, as the cable often wears out, and could be causing some of your clutch problems. Also covers clutch adjustment.

911 Clutch Replacement

One of our most requested, here is the low-down on how to replace your own clutch in your 901 or 915 equipped 911.

911 Factory Short Shift Kit Install

Bob Tindel offers his usual-excellent approach to installing the factory short-shift kit into your car.

911 G50 Clutch Replacement

Carreras with G50 transmissions need their clutches maintained too! Learn how in this step-by-step article by Jim Smolka.

911 Shifting Improvements

Tired of sloppy shifting in your 911? Try a few of these small suggestions for improving your shift linkage setup.

914 Clutch Replacement

Our biggest and best article yet! Over 45 photos describe every detail and every pitfall involved in doing your own clutch replacement on the 914 and 914-6!!!

914 Shift Selector Rod Seal Replacement

Oil leaking out of the back of your transmission? Want to replace the seal? It's real easy with this little tech article.

914 Shifting Improvements

Got problems with shifting your 914? Check out this article for the best tips used in improving your 914 shifting.

Click here to see more related articles...

914 Tail-Shifter Linkage Improvements

Here's a neat little guest article from a Pelican fan who managed to renew his tail shifter without too much time, money, or effort.

Full-On 901 Synchro Change!

Rebuilding your transmission might be easier that you think! In this article, Red-Beard goes through a complete, step-by-step teardown of a 901 transmission.

Installing the 911 Factory Short Shift Kit

Here's a step-by-step instruction set on how to install the 911 Factory Short Shift Kit, brought to you by Scott Booth.

Repairing 1st Gear on the 901 Transmission

It's almost typical to have a 901 that crunches or is difficult to get into first gear. The repair is relatively easy, if you have all the right parts.

Shifter Rod Seal Replacement

Joe Wolfgang and Wayne team up to offer you an easy solution for replacing your transmission shift rod seal.

Transmission Final Drive Computer

Here is a little program John Rogers wrote to do some speed vs RPM calculations after he did a rally a couple of months ago. It's pretty fun to play around with.

Transmission Gear Ratios

Figure out the exact ratios that you need to figure out for your Porsche with Andrew Warren's 901 & 915 spreadsheets.

Average Customer Review:

(based on 4 reviews)

Reviewed by 4 Customers		Sort by:
	write a review for this item

don't start without it.

By Gavin D., submitted September 8, 2012

Comments: literally don't start without this tool. Working on a sporto box, it was a guess if it fitted. Only with this tool can you remove a serviceable ring to use again. Well worth the customs duty!

Not what expected!

By Spin'n Wheel, submitted October 27, 2009

Comments: Having used what have been an "older" version I expected to receive a more solid "drift" component, but what I received was a hollowed out piece. I anticipate that this lessor piece will not stand up over time in its intended purpose. That would be fine if you could replace just that piece that takes a pounding for a few $'s but I unaware if that is possible. Other than this criticism its vital for working on your trans.

You need this tool

By red-beard, submitted October 20, 2009

Comments: High quality tool designed to press out and press in the dog teeth from the gear. If you want to rebuild your 901 correctly, you need this tool.

Dream come true!

By William S., submitted October 20, 2009

Comments: This tool made it so easy to replace the 1st gear synchro teeth on my 901 transmission it almost did the work itself! Thanks, awesome product.

Transmission Synchro Tools

Grinding your teeth worrying about your transmission? If you are planning on repairing some grinding gears, then these synchro hub removal tools make this process a breeze. If you have ever attempted this task without these tools, then you will know first-hand how valuable they are. All of these tools are specifically designed to remove the synchro hubs and rings from their respective gears.

Synchro Hub Removal Tool

This tool helps you to remove the synchro hubs (dog teeth) from the gear sets. Without it, you may need to cut off the synchro hub from the gear. Note: not to be used to remove the neighbor's dog's teeth from your ankle.

Kit Parts:

There are no kits associated with this part.

Write a Review: PEL-SIR-P225

Review title:

Overall rating:

How long have you owned this product?

Comments:
(Please give a detailed description of what you liked or disliked about this product)
(2,500 characters max)

Your nickname:

Upload a Photo:

* I have read and agree to abide by the Product Review Guidelines.