The Axle Popper II, the air tool version of our popular Axle Popper, breaks loose half shafts from transaxle on front wheel drive vehicles.
The Axle Popper II is the air tool version of our original Axle Popper Fork (PN 71411). Like our original fork, the Axle Popper II is tapered on both ends of the wedge along with a 6” shaft to fit into the Technician’s air hammer.
The base of the Axle Popper II has been increased by 3/8” to give it additional strength while decreasing potential deflection with the increased power of an air hammer.
Half Shafts are sometimes difficult to break loose with a pry bar.
Safer than using a pry bar, the Axle Popper II has a wedge forked end which applies even pressure to both sides of the shaft for sure release of the shaft.
Customers who bought this product also were interested in:
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.