Get a bigger bite and better angle cuts with our air nibbler. Instead of shearing or sawing, the tool actually "nibbles" cold rolled steel, plastic, tin, aluminum, and other metals, up to 18 guage thicknesses at a rate of more than 6 ft. per minute. It's ideal for paint and auto body shops, tinsmiths, and sheet metal shops.
Cuts out quarter panels without distorting the edges of the material Start cuts in the center of a panel Holds a tight 1/4" radius with great accuracy Easy to operate and control Balanced, lightweight tool Requires 1/2" pilot/starter hole
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.