2009 supercharged 6.2L V8 engines use a keyway to locate the balancer, and the timing sprocket and balancer must be installed over this keyway
J-41665-A is slotted to fit over this keyway, and is used with the forcing screw and hardware from either J-41478 Front Seal Installer or EN-47812 Front Seal Installer Bolt to seat the lower timing gear sprocket and then the engine balancer
Both are press-fit, and must be fully seated to prevent damage to other engine components, such as the oil pump
J-41665-A will back-service all small-block V8 engines to 1997 (4.8L, 5.3L, 5.7L, 6.0L, 7.0L), with or without the keyed balancer
Manufacturer: OTC TOOLS & EQUIPMENT
Customers who bought this product also were interested in:
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.