7-Ton Multi-Purpose Bearing and Pulley Puller Kit
Wide Spread Crossbar with 3 pin-hole @ 7-1/4"; to 9";
2 pair of long reach jaws gives user reach options of 5-1/2"; and 9-1/2";
2 long reach forcing screws (live center) for pushes of 4-1/2"; to 10-1/2";
Accepts shorter jaws from 4534 kit
7 Ton version of our Multipurpose Bearing and Pulley Puller Set
Uses Classic "H" Bar style puller block for 7" to 11" applications, has two sets of jaws where reaches of five to nine+ inches of reach is required, includes two forcing screws for short and long pushes even where access may be limited. Jaws interchangeable between both sets. Where Push Pullers are required as the best pulling solution and threaded holes are not available for attachment. Vehicle components such as heavy duty pinion bearings, side bearings, alternators, generators, power steering and crankshaft pulleys, timing gears and harmonic balancers.
Manufacturer: OTC TOOLS & EQUIPMENT
Customers who bought this product also were interested in:
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.