Parts Catalog Accessories Catalog Tech Info Tech Forums
 
  Search our site:    
View Recent Cars  |   Cart  | Project List | Order Status | Help    
 
- Back to Catalog -
• 911 Engine/Transmission Jack Adapter
• 911 Engine/Transmission Jack Adapter (1984-98)
• 911 Engine Only Jack Adapter
• Porsche 911 Engine Lift Bar Tool
• Jack Pad
• Jack Stands
• AC Hydraulic Jacks
• Lug Nut Soft Socket
• Lug Nut Torque Socket Set
• Porsche Engine Rebuild Stand
• Engine Stand for Water-Cooled Engines
• Engine Stand Adapter Ring
• Engine Yoke Securing Nuts
• 12-Point/12mm Flywheel Socket
• Heavy Duty Flywheel Lock
• Oil Filter Wrenches
• Drain Plug Removal Tool
• Transmission Drain Plug Removal Tool
• Smart Racing Products Alignment Tools
• Hub/Bearing Extractor and Installer Kit
• Oil Seal Installation Tools
• Secondary Air Injection (SAI) Maintenance DVD
• Secondary Air Injection (SAI) Maintenance Tool Kit
• Mechanical Tensioner/Tool
• Cylinder Holding Tool
• Top Dead Center Indicator
• Leakdown/Compression Gauge Adapter
• Metric Dial Indicator Gauge
• Cam Nut Tool
• Camshaft Tools
• Camshaft Sprocket Alignment Tool
• Valve Spring Tools
• 911 Valve Adjustment Tool
• Valve Adjustment Tool with Loop Handle
• Exhaust Head Stud Repair Kit
• Crankshaft Holder
• Circlip Injector Tool
• Transmission Synchro Tools
• Shift Fork Jig
• Pulley Wrench Tools
• Fuel Injection Tools
• Mechanical Injection Pump Tools
• CIS Fuel Enrichment Wrench
• C.I.S. K-Jetronic Fuel Injection Tester
• Ball Joint Tools
• Tie Rod Tools
• Factory Timing Belt Tensioning Tool
• Timing Sprocket Registration Pin Puller
• 944/968 Flywheel Lock
• Synchrometer
• Float Gauge
• Allen Head Tools
• CV Bolt Removal Tool
• Magnetic Box "V" Wrench (17mm)
• Suspension Alignment Tools
• Ride Height Wrench
• Trailing Arm Height Adjuster
• Elephant Racing Spring Plate Bushing Removal Tool
• Extraction Tools
• Spanner Wrench Set
• 32 MM Oil Line Wrench
• 36 MM Oil Line Wrench
• Clutch Alignment Tool
• Disassembly Tools
• Factory Air Pump
• Custom Service Cover
• Durametric Software Diagnostic Tool for Porsche
• AutoEnginuity Complete OBDII Diagnostic Tool
• ScanTool Software Expansions
• Air/Fuel Ratio Meter
• WEGO IV Wide-Band Air/Fuel Ratio Tuning Aid
• Innovate Motorsports LM-2
• Redline Detection Smoke Pro
• Airlift Cooling System Tool Kit
• Radio Removal Tools
• Pelican Engine Rebuild Super Tool Kits
- Back to Catalog -
Home >  Porsche Catalog >   Lathe Adapters   
Lathe Adapters - Page 13

Air/Fuel Ratio Meter

WEGO IV Wide-Band Air/Fuel Ratio Tuning Aid
The WEGO IV is a highly accurate and complete air/fuel ratio metering system with built-in data logging. The unit displays air/fuel ratio (AFR) and continuously logs over 2 hours of data, including AFR, engine RPM, and a spare 0-5V analog input for sensors such as throttle position or manifold pressure.
  • Includes Bosch LSU 4.2 oxygen sensor, 96" sensor extension cable, 18 x 1.5 mm weld nut for exhaust pipe, USB cable, and software for downloading and charting
  • Data is easily exported to a spreadsheet
  • Attractive black anodized aluminum housing with convenient front panel mini USB port, compact size: 3.3"L x 2.1"W x 0.9"H
  • RPM input signal connects directly to Porsche tachometer - no adapter required
  • Easy free-air calibration for sensor aging effects
  • Ultra-bright daylight readable blue LED display and automatic dimming under low light conditions
  • 0-5V analog AFR output for interface to dyno instrumentation
  • Industrial grade clamping terminal block on rear panel allows easy hookup
Available in either single or dual channel. Dual channel unit displays and logs two channels of AFR data. The 12 foot extension cable is sold separately and is necessary for installation in a rear engine car (two are required for the dual-channel unit).

IG3-114001

WEGO IV Wide-band AFR Gauge and Data Logger    [More Info]

$460.00

IG3-113001

WEGO IV Dual Channel Wide-band AFR Gauge and Data Logger    [More Info]

$687.50
IG3-115004

WEGO 12 Foot Extension Cable    [More Info]

$29.50
Innovate Motorsports LM-2
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter's digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2's self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
  • Patented “Direct Digital" Wideband Technology
  • Wideband O2 Compatible with ALL fuel types
  • Single or Dual Channel Version Available
  • OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
  • Log directly to SD card (included)
  • Playback log data on screen and/or with powerful LogWorks software (included)
  • Large high-contrast graphics LCD
  • Built-in RPM converter (direct frequency or with optional inductive clamp)
  • 4 fully-differential analog inputs
  • 2 configurable linear analog outputs
  • Positive lock connectors for all connections
  • Innovate MTS serial IN and OUT
  • USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.

The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included!

More accessories for your LM-1 available here.

For permanently installed tuning solutions, click here.

Manufacturer: Innovate Motorsports
   Click here to visit the manufacturer's home page.

INN-3806

Innovate Motorsports LM-2: Digital Air/Fuel Ratio Meter    [More Info]

$479.00

Redline Detection Smoke Pro

This tool is designed for serious shops and technicians. It is the most advanced smoke machine available to date. This advanced design eliminates the need for nitrogen when testing an EVAP system. The Total-Tech(TM) operates on White Medicinal Mineral Oil H-1 (baby oil) and does not require annual oil changes. The Total-Tech(TM) utilizes two stage regulation to precisely deliver smoke or air at the approved EVAP test pressure of 12-14 inches of water column. The Total-Tech(TM) provides the operator with a pressure gauge as well as a flowmeter. These components allow the technician to test any system using pressure decay in seconds, and to visually detect the rate of leakage on the flowmeter. The Total-Tech(TM) also incorporates a Flow Control Valve. This valve also allows the technician the versatility to pinpoint a leak without the masking effect of excessive smoke. The Total-Techs(TM) compact design allows the unit to hang under the hood or chassis during testing. Machined from billet aerospace aluminum and stainless steel, the Total-Tech(TM) is made in America and unconditionally warranted for one full year.
What's Included:
• Smoke Pro machine
• Exhaust cone adaptor
• 16 piece cap plug set
• Hand held halogen lamp
• EVAP service port adaptor
• Schrader valve removal tool
• 8 ounce bottle of Mineral Oil
• Instructional DVD

SMK-95-0001

Redline Detection Smoke Pro Total Tech with Standard Accessory Kit    [More Info]

$1180.00

Airlift Cooling System Tool Kit

This tool is designed to purge air, check for vacuum leaks and allow easy filling of the cooling system. The Problem: Airlocks in the cooling system of today's vehicles have become a prevalent problem. They can be caused by the positioning of the radiator at a level equal to or lower than the engine. Upon refilling with liquid, air is trapped in the cooling system reducing circulation. This results in overheating, added installation time and other problems. While auto manufactures have attempted to address this by installing air bleed devices on the cooling circuit, they are still plagued by airlocks. The Solution: The AirLift system, purges those problematic airlocks, checks for vacuum leaks and allows refilling the cooling system quickly and easily.

• Refills the entire cooling system including the Heater Core!
• Eliminate time consuming bleeding and purging
• Check for leaks while under vacuum
• Works on: Cars, Trucks, Off Road
NOTE: An air compressor is needed to use this tool.


TOL-UV550000

Airlift Cooling System Leak Checker and Airlock Purge Tool Kit    [More Info]

No Longer Available 

Radio Removal Tools


000-721-957-01-OEM

Porsche Radio Removal Tool (pair)
   Brand: Genuine Porsche    [More Info]

$4.50
Every key in this kit is current up to 2005. Works for Mercedes and Porsche Boxsters and 996 cars equipped with Becker radios. Updated key combo for all Audi and VW radios up to 2006, and models equipped with four horizontal (Audi) or two vertical slots (New Beetle, Jetta, etc). Five-sided pentagon driver for most every BMW model, and special allen key for E38 and E39 models. Standard barbed hooks for Saab, Land Rover, Ford, Chevrolet, etc.

PEL-TOL-ST9015

Radio Removal Kit: O.E. Radio Key Switch Blade    [More Info]

$33.25

Pelican Engine Rebuild Super Tool Kits

There are some specialized tools that are essential to the proper rebuild of your engine. The Pelican Super Tool Kit contains all of the following tools:
  • 5-Arm Engine Mount Stand
  • Camshaft Holding Bar
  • 46mm Crowsfoot Wrench for Camshaft Nut Removal (through 1980)
  • Z-Block Holder for Dial Gauge
  • Flywheel Bolt Tool
  • Flywheel Lock
  • Chain Tensioner Tool
  • Piston Hold-Down Tools (6)
  • Ring Compressor Tool
  • Valve Adjustment Tool
  • Heat Exchanger Barrel Nut Removal Tool
  • Set of Six Acid Brushes
Engine Rebuild Tools are NON-RETURNABLE items.

PEL-REBKT-13N

Pelican Engine Rebuild Super Tool Kit (1965-1980 1/2)    [More Info]

$702.98

PEL-REBKT-14N

Pelican Engine Rebuild Super Tool Kit (1980 1/2-1989)    [More Info]

$684.37

  Page 13 of 13  <12345678910111213

 

        

  Search our site:    

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping] [Careers]

Copyright © Pelican Parts Inc. -    DMCA Registered Agent Contact Page


Page last updated: Fri 12/9/2016 01:03:36 AM