Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
View Recent Cars  |   Cart  | Project List | Order Status | Help    
- Back to Catalog -
911 Engine/Transmission Jack Adapter
911 Engine/Transmission Jack Adapter (1984-98)
911 Engine Only Jack Adapter
Porsche 911 Engine Lift Bar Tool
Jack Pad
Jack Stands
AC Hydraulic Jacks
Lug Nut Soft Socket
Lug Nut Torque Socket Set
Porsche Engine Rebuild Stand
Engine Stand for Water-Cooled Engines
Engine Stand Adapter Ring
Engine Yoke Securing Nuts
12-Point/12mm Flywheel Socket
Heavy Duty Flywheel Lock
Oil Filter Wrenches
Drain Plug Removal Tool
Transmission Drain Plug Removal Tool
Smart Racing Products Alignment Tools
Hub/Bearing Extractor and Installer Kit
Oil Seal Installation Tools
Secondary Air Injection (SAI) Maintenance DVD
Secondary Air Injection (SAI) Maintenance Tool Kit
Mechanical Tensioner/Tool
Cylinder Holding Tool
Top Dead Center Indicator
Leakdown/Compression Gauge Adapter
Metric Dial Indicator Gauge
Cam Nut Tool
Camshaft Tools
Camshaft Sprocket Alignment Tool
Valve Spring Tools
911 Valve Adjustment Tool
Valve Adjustment Tool with Loop Handle
Exhaust Head Stud Repair Kit
Crankshaft Holder
Circlip Injector Tool
Transmission Synchro Tools
Shift Fork Jig
Pulley Wrench Tools
Fuel Injection Tools
Mechanical Injection Pump Tools
CIS Fuel Enrichment Wrench
C.I.S. K-Jetronic Fuel Injection Tester
Ball Joint Tools
Tie Rod Tools
Factory Timing Belt Tensioning Tool
Timing Sprocket Registration Pin Puller
944/968 Flywheel Lock
Float Gauge
Allen Head Tools
CV Bolt Removal Tool
Magnetic Box "V" Wrench (17mm)
Suspension Alignment Tools
Ride Height Wrench
Trailing Arm Height Adjuster
Elephant Racing Spring Plate Bushing Removal Tool
Extraction Tools
Spanner Wrench Set
32 MM Oil Line Wrench
36 MM Oil Line Wrench
Clutch Alignment Tool
Disassembly Tools
Factory Air Pump
Custom Service Cover
Durametric Software Diagnostic Tool for Porsche
AutoEnginuity Complete OBDII Diagnostic Tool
ScanTool Software Expansions
Air/Fuel Ratio Meter
WEGO IV Wide-Band Air/Fuel Ratio Tuning Aid
Innovate Motorsports LM-2
Redline Detection Smoke Pro
Airlift Cooling System Tool Kit
Radio Removal Tools
Pelican Engine Rebuild Super Tool Kits
- Back to Catalog -
Home >  Porsche Catalog >   Air Hose Accessories 
Air Hose Accessories - Page 12

AutoEnginuity Complete OBDII Diagnostic Tool

AutoEnginuity's Scan Tool is a professional PC, Pocket PC, and Palm diagnostics scan tool for all OBDII (OBD2) and EOBD IV+ compliant vehicles. AutoEnginuity's Scan Tool allows you to read the vehicle's diagnostic trouble codes, live vehicle sensors (including wide-band O2 sensors), actuate bi-directional controls, reset adaptations, and view inspection/maintenance system test results to quickly determine what service the vehicle requires.

The ScanTool was designed to be as easy to learn as it is powerful. It comes with an automated installation process, a complete and comprehensive User's Guide, and an easy-to-use interface. You won't have to spend valuable time learning another piece of software; you can focus on what's important - servicing the vehicle.

What AutoEnginuity's ScanTool can do:

  • Save, print, read and clear Stored and Pending P, U, B, and C Trouble Codes. Supporting P0 - P9 generic and manufacturer specific codes (including the new lettered codes (e.g., P06A0)
  • The largest manufacturer specific trouble code library of all PC/PDA-based scan tools (30,000+)
  • Read and clear Freeze Frame data
  • View live vehicle sensors in a meter, graph, or grid format
  • View oxygen sensor live data and test results
  • View all 11 Inspection/Maintenance systems and Mode 6 data
  • Unlimited logging of live vehicle sensors in TXT, XML, or CSV (1ms logging accuracy)
  • Playback your data logs for offline analysis
  • Run and query specific component and system tests. Support for generic and enhanced bi-directional tests
  • View generic and manufacturer enhanced data on the same tool
  • English or Metric (SI) units of measure supported
  • Configure your sensors' ranges, scaling value, audible alert triggers, units, and sampling rate
  • Savable configurations. Set up the interface to suit your preferences and save it so you never have to do it again
  • Supports 1996 and newer passenger vehicles, whether it be domestic, Asian, or European. SAE interfaces: J1850 (PWM and VPM), ISO-9141-2, ISO-14230 [KWP2000], and CAN [11bit and 29bit]

Something ScanTool offers that the others don't:

  • True Plug-n-Play USB 2.0 interface1
  • Factory scan tool options available (not included in base kit) All generic scan tools can only access the powertrain, no matter what SAE Modes (J1979/J2190) they use for communication. With our expansions, you can access dozens of systems (ABS, transmission, GEM, SRS/Airbags, Instrument Cluster, etc.) generic scan tools can't even see. This gives you access to thousands of sensors and dozens of bi-directional controls/system tests. Click here for complete enhanced option details.
  • Optional expansions allowing you to communicate with non-OBD-II vehicles like the Powerstroke, Duramax, and Cummins diesels.
  • Bi-directional support. You have the ability to initiate system and component tests2
  • Mode 6 support. If a system test fails, now you can see the results from the failing component; not just the system. Our Mode 6 data is fully translated so you don't have to waste hours looking the scale and definitions.2
  • Mode 9 support. Full ECM information including CAL, CVN, and VIN reporting
  • Support for CAN and even the CAN 6x Mode3
  • Support for the new extended sensor list (233 sensors--supporting the SAE J1979 May 2007 additions)
  • Includes SpeedTracer - a performance analysis software for your PC or PDA!
  • ALL the OBD-II vehicle interfaces in a single cable, rugged case. This is a savings of hundreds of dollars over the competitors' units

Pelican Technical Article on OBDII Diagnostics
AutoEnginuity Product Comparison Chart
Frequently Asked Questions about AutoEnginuity
AutoEnginuity Software Release Notes
AutoEnginuity Downloads

NOTE: Bluetooth accessibility is a hardware upgrade option that MUST be purchased at the time of ScanTool purchase. It is NOT an add-on adapter, but instead a modification performed on a per-order basis. Please refer to the manufacturer-specific expansion packages below in order to correctly diagnose your particular vehicle.

1PC version only.
2Support for this feature is vehicle dependant.
3CAN is used in all 2004 Ford, Mazda, and some Mercedes, and Toyota. CAN is the new required electrical OBDII interface for passenger vehicles starting in the 2008 model year.


AutoEnginuity ScanTool Porsche Kit for PC, includes ScanTool Kit for Windows PC (#ST06) and Porsche Enhanced Interface Expansion (#EI13)    [More Info]


AutoEnginuity ScanTool - Porsche Enhanced Interface Expansion    [More Info]



AutoEnginuity ScanTool Kit for Palm OS 3.5 or greater    [More Info]

No Longer Available 


AutoEnginuity ScanTool Kit for Windows Pocket PC 2002 and 2003 operating system    [More Info]

No Longer Available 

Bluetooth Wireless Interface for PDA upgrade option for ScanTool kit    [More Info]

No Longer Available 
ScanTool Software Expansions
With these software add-ons, you can access hundreds of extra systems, sensors, and system tests beyond the standard OBDII emissions-related Powertrain systems and sensors. Software for the following manufacturers is available:

BMW/Mini-specific sensors and actuation commands
Porsche-specific sensors and actuation commands
VW/Audi-specific sensors and actuation commands
Mercedes-specific sensors and actuation commands
GM-specific sensors and actuation commands
Ford-specific sensors and actuation commands
Chrysler/Dodge/Plymouth/Eagle-specific sensors and actuation commands
Toyota/Scion/Lexus-specific sensors and actuation commands
Nissan/Infiniti-specific sensors and actuation commands
Honda/Acura-specific sensors and actuation commands
Mazda-specific sensors and actuation commands
Subaru-specific sensors and actuation commands
Mitsubishi-specific sensors and actuation commands
Isuzu-specific sensors and actuation commands
Hyundai/Kia-specific sensors and actuation commands
Land Rover-specific sensors and actuation commands
Jaguar-specific sensors and actuation commands

For more information about reading OBD-II Fuel Injection Systems using the ScanTool, check out our Technical Article here.

If you have any more questions or would like to see some screenshots, check out the FAQ.

AutoEnginuity ScanTool - Porsche Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - BMW Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 7C or #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - Mercedes Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - VW/Audi Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - Ford Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 4F+ or #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - GM with CAN Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - Chrysler Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - Toyota Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - Mazda Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 4F+ or #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - Nissan Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 7C or #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - Honda Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - Mitsubishi Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - Subaru Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - Hyundai/Kia Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 7C or #ST06 ProLine Interface)    [More Info]


AutoEnginuity ScanTool - Land Rover Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 7C)    [More Info]



AutoEnginuity ScanTool - Jaguar Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 7C)    [More Info]


  Page 12 of 13  <12345678910111213>


  Search our site:    

View Cart & CheckOut | Project List | Order Status |  Help    


[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping] [Careers]

Copyright Pelican Parts Inc. -    DMCA Registered Agent Contact Page

Page last updated: Sat 10/22/2016 01:09:31 AM