The Series 440 is 100% non-shedding organic synthetic microfiber constructed with a prefiltering media on the air entering side, and a high density synthetic fiber filter layer on the air leaving side formed into self-supporting “V” pockets. The final filter layer is coated with Viskon-Aire® PBT-32™ Tackifier to provide a non-migrating encapsulating tackifier to ensure positive dust holding capacity. All layers are bonded together to form a progressive density laminate that will provide superior dust holding and eliminate fiber migration. The filter is constructed with a non-corrosive, welded wire frame. Each pocket will be stabilized with a non-corrosive fastener to prevent over inflation of the pocket. The wire frame shall be 11 gauge galvanized steel and be formed to have rounded corners and no sharp edges. There is to be wire frames both upstream and downstream of the media for maximum pocket support and allow the filter to be self sealing in standard holding frames.
Customers who bought this product also were interested in:
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.