This unique specialty tool has been designed to easily remove “ripped” and “stuck on” spark plug boots where there is no access to grab the boot for removal.
In usage, this tool goes down in the confined space of the spark plug hole and with hand pressure separates the stuck on piece of rubber boot from the porcelain part of the plug.
This spark plug boot tool then slides out with the damaged boot leaving the spark plug exposed and easily removed.
Made from quality heat treated steel, this tool comes in a High Tech black finish.
Designed specifically for these engines: Ford 4.6L V8 2 valve heads 1997-1999 4.6L V8 2 valve heads 2000 and later 4.6L V8 3 valve heads 2007 and later 5.4L V8 2 valve heads 1997-2004 5.4L V8 3 valve heads 2005 and later 6.8L V10 2 valve heads 1999-2008 6.8L V10 3 valve heads 2008 and later
Chrysler 3.7L V6 2 valve heads 2005 and later 5.7L V8 Hemi 2 valve heads 2004 and later
Works on most other spark plugs with a porcelain diameter smaller than 0.432 of an inch
Manufacturer: SCHLEY PRODUCTS
Customers who bought this product also were interested in:
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.