| Porsche Tools - Page 13 |
Air/Fuel Ratio Meter |
| WEGO IV Wide-Band Air/Fuel Ratio Tuning Aid |
The WEGO IV is a highly accurate and complete air/fuel ratio metering system with built-in data logging. The unit displays air/fuel ratio (AFR) and continuously logs over 2 hours of data, including AFR, engine RPM, and a spare 0-5V analog input for sensors such as throttle position or manifold pressure.- Includes Bosch LSU 4.2 oxygen sensor, 96" sensor extension cable, 18 x 1.5 mm weld nut for exhaust pipe, USB cable, and software for downloading and charting
- Data is easily exported to a spreadsheet
- Attractive black anodized aluminum housing with convenient front panel mini USB port, compact size: 3.3"L x 2.1"W x 0.9"H
- RPM input signal connects directly to Porsche tachometer - no adapter required
- Easy free-air calibration for sensor aging effects
- Ultra-bright daylight readable blue LED display and automatic dimming under low light conditions
- 0-5V analog AFR output for interface to dyno instrumentation
- Industrial grade clamping terminal block on rear panel allows easy hookup
Available in either single or dual channel. Dual channel unit displays and logs two channels of AFR data. The 12 foot extension cable is sold separately and is necessary for installation in a rear engine car (two are required for the dual-channel unit). |
|
IG3-114001 | WEGO IV Wide-band AFR Gauge and Data Logger [More Info] | $460.00 |  |
IG3-113001 | WEGO IV Dual Channel Wide-band AFR Gauge and Data Logger [More Info] | $687.50 | |
IG3-115004 | WEGO 12 Foot Extension Cable [More Info] | $29.50 | |
| Innovate Motorsports LM-2 |
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meters digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. - Patented Direct Digital Wideband Technology
- Wideband O2 Compatible with ALL fuel types
- Single or Dual Channel Version Available
- OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
- Log directly to SD card (included)
- Playback log data on screen and/or with powerful LogWorks software (included)
- Large high-contrast graphics LCD
- Built-in RPM converter (direct frequency or with optional inductive clamp)
- 4 fully-differential analog inputs
- 2 configurable linear analog outputs
- Positive lock connectors for all connections
- Innovate MTS serial IN and OUT
- USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included!
More accessories for your LM-1 available here.
For permanently installed tuning solutions, click here.
Manufacturer: Innovate Motorsports
Click here to visit the manufacturer's home page. |
|
INN-3806 | Innovate Motorsports LM-2: Digital Air/Fuel Ratio Meter [More Info] | $479.00 | |
Redline Detection Smoke Pro |
This tool is designed for serious shops and technicians. It is the most advanced smoke machine available to date. This advanced design eliminates the need for nitrogen when testing an EVAP system. The Total-Tech(TM) operates on White Medicinal Mineral Oil H-1 (baby oil) and does not require annual oil changes. The Total-Tech(TM) utilizes two stage regulation to precisely deliver smoke or air at the approved EVAP test pressure of 12-14 inches of water column. The Total-Tech(TM) provides the operator with a pressure gauge as well as a flowmeter. These components allow the technician to test any system using pressure decay in seconds, and to visually detect the rate of leakage on the flowmeter. The Total-Tech(TM) also incorporates a Flow Control Valve. This valve also allows the technician the versatility to pinpoint a leak without the masking effect of excessive smoke. The Total-Techs(TM) compact design allows the unit to hang under the hood or chassis during testing. Machined from billet aerospace aluminum and stainless steel, the Total-Tech(TM) is made in America and unconditionally warranted for one full year.
What's Included:
Smoke Pro machine
Exhaust cone adaptor
16 piece cap plug set
Hand held halogen lamp
EVAP service port adaptor
Schrader valve removal tool
8 ounce bottle of Mineral Oil
Instructional DVD |
|
SMK-95-0001 | Redline Detection Smoke Pro Total Tech with Standard Accessory Kit [More Info] | $1095.00 | |
Airlift Cooling System Tool Kit |
| This tool is designed to purge air, check for vacuum leaks and allow easy filling of the cooling system. The Problem: Airlocks in the cooling system of today's vehicles have become a prevalent problem. They can be caused by the positioning of the radiator at a level equal to or lower than the engine. Upon refilling with liquid, air is trapped in the cooling system reducing circulation. This results in overheating, added installation time and other problems. While auto manufactures have attempted to address this by installing air bleed devices on the cooling circuit, they are still plagued by airlocks. The Solution: The AirLift system, purges those problematic airlocks, checks for vacuum leaks and allows refilling the cooling system quickly and easily. Refills the entire cooling system including the Heater Core!
Eliminate time consuming bleeding and purging
Check for leaks while under vacuum
Works on: Cars, Trucks, Off Road
NOTE: An air compressor is needed to use this tool. |
|
TOL-UV550000 | Airlift Cooling System Leak Checker and Airlock Purge Tool Kit [More Info] | $154.75 | |
Radio Removal Tools |
000-721-957-01-OEM | Porsche Radio Removal Tool (pair)
Brand: Genuine Porsche [More Info] | $4.25 | |
| This is a 32 piece stereo/navigation removal tool kit covers almost all OEM car stereo systems for the last 20 years along with popular systems from Becker, Clarion, Kenwood, Sony, Grundy and Blaupunkt. Includes a custom blow molded case. |
|
SCHW-AAR-32PCS | Radio/Navigation Removal Kit, 32-Piece [More Info] | $45.00 | |
| Every key in this kit is current up to 2005. Works for Mercedes and Porsche Boxsters and 996 cars equipped with Becker radios. Updated key combo for all Audi and VW radios up to 2006, and models equipped with four horizontal (Audi) or two vertical slots (New Beetle, Jetta, etc). Five-sided pentagon driver for most every BMW model, and special allen key for E38 and E39 models. Standard barbed hooks for Saab, Land Rover, Ford, Chevrolet, etc. |
|
PEL-TOL-ST9015 | Radio Removal Kit: O.E. Radio Key Switch Blade [More Info] | $32.95 | |
Pelican Engine Rebuild Super Tool Kits |
There are some specialized tools that are essential to the proper rebuild of your engine. The Pelican Super Tool Kit contains all of the following tools:- 5-Arm Engine Mount Stand
- Camshaft Holding Bar
- 46mm Crowsfoot Wrench for Camshaft Nut Removal (through 1980)
- Z-Block Holder for Dial Gauge
- Flywheel Bolt Tool
- Flywheel Lock
- Chain Tensioner Tool
- Piston Hold-Down Tools (6)
- Ring Compressor Tool
- Valve Adjustment Tool
- Heat Exchanger Barrel Nut Removal Tool
- Set of Six Acid Brushes
Engine Rebuild Tools are NON-RETURNABLE items. |
|
PEL-REBKT-13N | Pelican Engine Rebuild Super Tool Kit (1965-1980 1/2) [More Info] | $643.55 | |
PEL-REBKT-14N | Pelican Engine Rebuild Super Tool Kit (1980 1/2-1989) [More Info] | $622.15 | |
