The Dual Action Hook and Loop Flexible Backing Plate is a molder urethane backing plate that attaches via the hook and loop system. This backing plate minimizes heat transfer while flexes to contour to your vehicle's curves. It is built tough and carries a one year warranty. The reinforced inner construction utilizes steel struts molded into the center hub to give you the plate stability while maintaining a great even surface for pads. The backing plate is smaller than the pads to allow a generous lip of foam to protect the paint surface. Even if you turn the pad onto its side accidentally, there is an inch of soft, beveled urethane between the edge of the plate and the inner construction. The threaded post fits any polisher with a 5/16" diameter.
Customers who bought this product also were interested in:
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.