| BMW Parts - Tools - Page 2 |
BMW Suspension Tools |
| B90 Adapters |
| PEL-TOL-SIRB90-3H | B90 Adapter 90mm [More Info] | $26.00 |  |
| PEL-TOL-SIRB90-3VA | B90 Adapter 100mm [More Info] | $29.30 | |
| PEL-TOL-SIRB90-3J | B90 Adapter 120mm [More Info] | $27.60 | |
| Front Wheel Hub/Bearing Nut Socket |
83-30-0-491-896-BOE | Front Wheel Hub/Bearing Nut Socket - 46mm, 3/4 in. Drive, BMW Tool #31-2-080, fits E23, E24, E28, E32, E34, E36, E38, E46 [More Info] | No Longer Available | |
| Rear Subframe Bushing Master Kit |
| No need to disassemble the whole rear end in order to use a hydraulic press with this tool. Designed for "On the Car Application" . This kit is needed for the proper R&R of the metal-clad rubber mount bushings of the rear Axle carrier sub frame. Incorporating a thrust bearing to ease the pulling/pushing action, reduces the wear and tear of the tool, ensuring longevity. This Bushing Master Kit comes complete with all the proper components to efficiently get the job done right. Comes equipped with a 14mm threaded rod and press nut. |
|
PEL-TOL-3026 | Rear Subframe Bushing Master Kit, BMW All E23, E24, E28, E30, E32, E34 And E36 Models [More Info] | $394.00 | |
| Front Control Arm Bushing Master Kit |
| Designed for efficient and selective "On The Car" removal and installation of the front control/track arm bushings. This bushing master kit eliminates the need to disassemble the whole control/track arm from the car in order to extract and then install a bushing with a hydraulic press, while the rest of the bushings on the arm are in good condition. The driver nut incorporates a thrust bearing, easing the press action, ensuring the longevity of the tool. |
|
TOL-BMW3021 | Front Control Arm Bushing Master Kit, BMW, All 5 Series E28/E34 (1982-1995), All E24 6 Series, All E32 7 Series (1988-1995), All E31 8 Series (1991-1996), Includes Both 50mm & 60mm receiver cups. See BMW3021-10 Update Kit for Later Applications [More Info] | $193.20 | |
| TOL-BMW3021-10 | Update kit for BMW3021 Front Control Arm Bushing Master Kit, E39 5 Series (1996-2003), E38 7 Series (1996-2003), Includes 70mm receiver Cup. To be used in conjunction with BMW3021 Master Kit [More Info] | $74.75 | |
| Eccentric Adjuster |
| Extremely crucial for adjusting your Toe-In of the rear wheels. 1/2 inch drive. |
|
PEL-TOL-3039 | Eccentric Adjuster, BMW E36 3 Series [More Info] | $50.40 | |
| Press Arbor Kit/Outer Ball Joints |
| Designed for the proper removal and installation of the outer ball joints on the front control arms on 3 Series Models. Comes complete with all the components to perfectly mate up to the factory ball joints. Must be used in conjunction with a hydraulic press. |
|
PEL-TOL-3038 | Press Arbor Kit, BMW E30 3 Series (1984-92), E36 3 Series (1992-98), E46 3 Series (1999-04) [More Info] | $175.60 | |
| Press Arbor Kit/Inner Ball Joints |
| Designed for the proper removal and installation of the inner ball joints on the front control arms on 3 Series Models. Used in conjunction with a hydraulic press, Or on the car application when used in conjunction with a C-Clamp. |
|
PEL-TOL-3028 | Press Arbor Kit, BMW E30 3 Series (1984-92), E36 3 Series (1992-98), E46 3 Series (1999-04) [More Info] | $153.70 | |
| Separator |
| Designed for the proper disassembly of the pitman arm type tie rod ends w/o tearing the ball joint boots. Base of opening is 18mm |
|
PEL-TOL-266H | Separator, Universal, 18mm opening [More Info] | $46.20 | |
