| BMW Parts - Tools - Page 10 |
Cooling System Tools |
| You can't do a job right without the correct tools. We here at Pelican are proud to offer these special tools for the BMW cooling system. |
|
| Fan Clutch Wrench |
| This special wrench is used in conjunction with the counter holder to remove the reverse threaded nut on the fan clutch pulley. |
|
PEL-TOL-103236T | Fan Clutch Wrench, 32mm x 36mm, BMW All Models, Each (BMW Service Tool Reference #11-5-040) [More Info] | $37.70 |  |
PEL-TOL-1032T | Fan Clutch Long Thin Spanner Wrench (32mm open end, 8mm thickness), BMW All Models, Each (BMW Service Tool Reference #11-5-040) [More Info] | $32.70 | |
Counter Holder/Fan Removal Tools |
These counter holders are a necessity for removing the water pump from your BMW. They are used to secure the fan hub while you remove the fan clutch pulley nut.
NOTE: The bolts on the water pump are non-symmetric, which means that you need to rotate the fan to find the two that will fit the tool properly. Only one position out of four potential positions will work. |
|
PEL-TOL-3037 | Counter Holder/Fan Removal Tool, M42 and M60 engines only (BMW Service Tool Reference #11-5-050) [More Info] | $36.10 | |
83-30-0-491-046-BOE | Counter Holder/Fan Removal Tool, BMW M10, M20, M30, M50, M52, M54, M56 with 32mm Clutch Nut, Each (BMW Service Tool Reference #11-5-030) [More Info] | $39.95 | |
Fuel Line Pliers |
Manufactured from Aluminium alloy and designed specifically for the removal of the newest design of fuel line clips and can also hold fuel lines without causing damage. These new fuel line clips can be found on Alfa Romeo, Audi, BMW, Porsche, Volkswagen, and Volvo.
NOTE: Please refer to the images to determine if these pliers are compatible with your vehicle's fuel system. |
|
SCHW-P-648 | Fuel Line Pliers (adjustable), fits newer BMW, Audi/VW, Porsche [More Info] | $16.95 | |
Brake Caliper Piston Tool |
| This kit allows you to rotate various pistons back into their caliper housing when changing brake pads. This kit works with Ford, GM, Volkswagen, Honda, Mazda, Mitsubishi, Subaru, Toyota, BMW, Audi and other vehicles. |
|
SCHW-PBK-11PCS | Brake Caliper Piston Tool (11 piece) [More Info] | $39.95 | |
AutoEnginuity Complete OBDII Diagnostic Tool |
AutoEnginuity's Scan Tool is a professional PC, Pocket PC, and Palm diagnostics scan tool for all OBDII (OBD2) and EOBD IV+ compliant vehicles. AutoEnginuity's Scan Tool allows you to read the vehicle's diagnostic trouble codes, live vehicle sensors (including wide-band O2 sensors), actuate bi-directional controls, reset adaptations, and view inspection/maintenance system test results to quickly determine what service the vehicle requires. The ScanTool was designed to be as easy to learn as it is powerful. It comes with an automated installation process, a complete and comprehensive User's Guide, and an easy-to-use interface. You won't have to spend valuable time learning another piece of software; you can focus on what's important - servicing the vehicle. What AutoEnginuity's ScanTool can do: - Save, print, read and clear Stored and Pending P, U, B, and C Trouble Codes. Supporting P0 - P9 generic and manufacturer specific codes (including the new lettered codes (e.g., P06A0)
- The largest manufacturer specific trouble code library of all PC/PDA-based scan tools (30,000+)
- Read and clear Freeze Frame data
- View live vehicle sensors in a meter, graph, or grid format
- View oxygen sensor live data and test results
- View all 11 Inspection/Maintenance systems and Mode 6 data
- Unlimited logging of live vehicle sensors in TXT, XML, or CSV (1ms logging accuracy)
- Playback your data logs for offline analysis
- Run and query specific component and system tests. Support for generic and enhanced bi-directional tests
- View generic and manufacturer enhanced data on the same tool
- English or Metric (SI) units of measure supported
- Configure your sensors' ranges, scaling value, audible alert triggers, units, and sampling rate
- Savable configurations. Set up the interface to suit your preferences and save it so you never have to do it again
- Supports 1996 and newer passenger vehicles, whether it be domestic, Asian, or European. SAE interfaces: J1850 (PWM and VPM), ISO-9141-2, ISO-14230 [KWP2000], and CAN [11bit and 29bit]
- Also resets the Service indicator Lights on models from 2001 on.
Something ScanTool offers that the others dont: - True Plug-n-Play USB 2.0 interface1
- Factory scan tool options available (not included in base kit) All generic scan tools can only access the powertrain, no matter what SAE Modes (J1979/J2190) they use for communication. With our expansions, you can access dozens of systems (ABS, transmission, GEM, SRS/Airbags, Instrument Cluster, etc.) generic scan tools can't even see. This gives you access to thousands of sensors and dozens of bi-directional controls/system tests. Click here for complete enhanced option details.
- Optional expansions allowing you to communicate with non-OBD-II vehicles like the Powerstroke, Duramax, and Cummins diesels.
- Bi-directional support. You have the ability to initiate system and component tests2
- Mode 6 support. If a system test fails, now you can see the results from the failing component; not just the system. Our Mode 6 data is fully translated so you don't have to waste hours looking the scale and definitions.2
- Mode 9 support. Full ECM information including CAL, CVN, and VIN reporting
- Support for CAN and even the CAN 6x Mode3
- Support for the new extended sensor list (233 sensors--supporting the SAE J1979 May 2007 additions)
- Includes SpeedTracer - a performance analysis software for your PC or PDA!
- ALL the OBD-II vehicle interfaces in a single cable, rugged case. This is a savings of hundreds of dollars over the competitors' units
Links:
Pelican Technical Article on OBDII Diagnostics
AutoEnginuity Product Comparison Chart
Frequently Asked Questions about AutoEnginuity
AutoEnginuity Software Release Notes
AutoEnginuity Downloads NOTE: Bluetooth accessibility is a hardware upgrade option that MUST be purchased at the time of ScanTool purchase. It is NOT an add-on adapter, but instead a modification performed on a per-order basis. Please refer to the manufacturer-specific expansion packages below in order to correctly diagnose your particular vehicle. 1PC version only.
2Support for this feature is vehicle dependant.
3CAN is used in all 2004 Ford, Mazda, and some Mercedes, and Toyota. CAN is the new required electrical OBDII interface for passenger vehicles starting in the 2008 model year. |
|
AE-ST06 | AutoEnginuity ScanTool Kit for PC (ProLine OBD-II/Enhanced Interface) - Windows 95/98/ME/NT/2000/XP/Vista/7 (Plug-n-Play USB 2.0 interface) [More Info] | $249.95 | |
| PEL-AEST-BMW | AutoEnginuity ScanTool BMW Kit for PC, includes ScanTool Kit for Windows PC (#ST06) and BMW Enhanced Interface Expansion (#EI07) [More Info] | $479.90 | |
| AE-EI07 | AutoEnginuity ScanTool - BMW Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 7C or #ST06 ProLine Interface) [More Info] | $229.95 | |
AE-ST03 | AutoEnginuity ScanTool Kit for Palm OS 3.5 or greater [More Info] | $249.95 | |
AE-ST02 | AutoEnginuity ScanTool Kit for Windows Pocket PC 2002 and 2003 operating system [More Info] | $249.95 | |
AE-EH03 | Bluetooth Wireless Interface for PDA upgrade option for ScanTool kit [More Info] | $129.95 | |
| ScanTool Software Expansions |
|
| AE-EI13 | AutoEnginuity ScanTool - Porsche Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface) [More Info] | $229.95 | |
| AE-EI07 | AutoEnginuity ScanTool - BMW Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 7C or #ST06 ProLine Interface) [More Info] | $229.95 | |
| AE-EI17 | AutoEnginuity ScanTool - Mercedes Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface) [More Info] | $229.95 | |
| AE-EI16 | AutoEnginuity ScanTool - VW/Audi Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface) [More Info] | $229.95 | |
| AE-EI01 | AutoEnginuity ScanTool - Ford Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 4F+ or #ST06 ProLine Interface) [More Info] | $199.95 | |
| AE-EI02-2 | AutoEnginuity ScanTool - GM with CAN Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface) [More Info] | $229.95 | |
| AE-EI04-2 | AutoEnginuity ScanTool - Chrysler Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface) [More Info] | $229.95 | |
| AE-EI03 | AutoEnginuity ScanTool - Toyota Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface) [More Info] | $149.95 | |
| AE-EI05 | AutoEnginuity ScanTool - Mazda Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 4F+ or #ST06 ProLine Interface) [More Info] | $149.95 | |
| AE-EI06 | AutoEnginuity ScanTool - Nissan Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 7C or #ST06 ProLine Interface) [More Info] | $149.95 | |
| AE-EI08 | AutoEnginuity ScanTool - Honda Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface) [More Info] | $229.95 | |
| AE-EI15 | AutoEnginuity ScanTool - Mitsubishi Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface) [More Info] | $229.95 | |
| AE-EI12 | AutoEnginuity ScanTool - Subaru Enhanced Interface Expansion (requires ScanTool #ST06 ProLine Interface) [More Info] | $149.95 | |
| AE-EI09 | AutoEnginuity ScanTool - Hyundai/Kia Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 7C or #ST06 ProLine Interface) [More Info] | $149.95 | |
| AE-EI10 | AutoEnginuity ScanTool - Land Rover Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 7C) [More Info] | $229.95 | |
AE-EI11 | AutoEnginuity ScanTool - Jaguar Enhanced Interface Expansion (requires ScanTool #ST05 OBDII Rev 7C) [More Info] | $229.95 | |
