| BMW E30 Cooling System Miscellaneous - Page 3 |
Heater Control/ Heater Cores / Control Valves / Blower Motors |
| Heating system not quite what you expected? Is your heating system that used to blast out heat like a thermonuclear reactor now just a Siberian winter? Replace your heater core with a new one from Pelican, and keep warm while driving through those Arctic blizzards. |
|
| Heater Valves |
| 64-11-1-386-706-BOE | Heater Valve For Plastic Heater Core (Must use w/O Rings 64-11-1-468-436-M325, 2 Needed), 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1987-91), M3 (1987-91)
Brand: Genuine BMW [More Info] | $210.50 |  |
| 64-11-1-386-707-M9 | Heater Valve For Aluminum Heater Core (Must use w/O Rings 64-11-1-468-436-M325, 3 Needed), 318i (1984-85), 325/e/es/i/is/iC/iX (1987-91), M3 (1987-91)
Brand: Genuine BMW [More Info] |  |
| $215.75 | |
| Heater Controls |
| 64-11-1-385-972-BOE | Heater Control (Dash Control), 318i/is/iC (1991), 325/e (1984-85), 325i/is/iC/iX (1987-91), M3 (1987-91)
Brand: Genuine BMW [More Info] | $72.50 | |
| Heater Blower Motors |
| Blower Motor Assembly, for Heater System (NOTE: Only for cars with aluminum heater core), 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91) |
| 64-11-1-370-930-BOE | Blower Motor Assembly, for Heater System (NOTE: Only for cars with aluminum heater core), 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91)
Brand: Genuine BMW [More Info] | $479.75 | |
64-11-1-370-930-M6 | Blower Motor Assembly, for Heater System (NOTE: Only for cars with aluminum heater core), 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91)
Brand: Behr [More Info] | |
| $266.00 | |
| Heater Valve O-Rings |
64-11-1-468-436-M325 | O Ring for Heater Valve, 3 Series, All (1984-91), As Needed, Each
Brand: Santech [More Info] | |
| $0.50 | |
| Heater Gaskets & Covers |
13-54-1-711-042-M200 | Water Housing Cover on Throttle Body, E30 325i/is/iX/iC
Brand: MTC [More Info] | |
| $6.75 | |
13-54-1-285-471-M9 | Gasket, Water Housing on Throttle Body, E30 318i, 325/e/es, 325i/is/iX/iC
Brand: Genuine BMW [More Info] | |
| $2.50 | |
13-54-1-289-576-M9 | Gasket, Throttle Housing to Intake Manifold, 325i/is/iC/iX (1987-91)
Brand: Genuine BMW [More Info] | |
| $5.00 | |
11-12-1-726-721-M17 | Gasket, Heater Flange to Head, 325e/es/i/is/iC/iX (1984-91)
Brand: Victor Reinz [More Info] | |
| $1.25 | |
Freeze Plugs |
| The mighty force of water can crack engine blocks in freezing conditions. Freeze plugs are used to safeguard your BMW's cooling system in freezing weather. The freeze plugs are small copper plugs that are designed to pop out of the bottom of the engine block when water freezes in the cooling passages, preventing the block from cracking. In order to prevent this, always use the correct mixture of anti-freeze to water as specified in your BMW's owner's manual, and make sure your freeze plugs are seated correctly in the block. |
|
11-11-1-717-939-M36 | | $1.50 | |
11-11-1-714-712-M36 | | $1.50 | |
Coolant Expansion Tanks |
| The coolant expansion tank provides an buffer for the coolant to 'overflow' to when the cooling system is running. Replace yours with a new one if it is cracked or if there is corrosion inside. |
|
17-11-1-707-540-M9 | Coolant Expansion Tank (cap not included), Plastic (use w/leveling Sensor 61-31-1-375-715), 325/e/es/i/is/iC/iX (through 8/87)
Brand: Genuine BMW [More Info] | |
| $85.75 | |
17-11-1-712-641-M9 | Coolant Expansion Tank (cap not included), 325/e/es/i/is/iC/iX (9/87-91)
Brand: Genuine BMW [More Info] | |
| $107.75 | |
17-11-1-712-835-M36 | Coolant Expansion Tank (cap not included), E30 318i M42, 318iC
Brand: Febi [More Info] | |
| $17.00 | |
17-11-2-225-543-M9 | Coolant Expansion Tank (cap not included), M3 (1987-91)
Brand: Genuine BMW [More Info] | |
| $101.75 | |
