| BMW E30 Clutch & Flywheel - Page 1 |
| This section contains clutches and related items. If you are looking for that little piece to complete your clutch job, you are in the right place. When doing a clutch job, it's always a good idea to replace the rear end seal on the engine at the same time, replace the throw-out bearing, flywheel bolts and pilot bearing. You should also replace the clutch release fork and the master/slave cylinders at the same time for added insurance. If you are re-using your flywheel, have it re-surfaced so your new clutch seats correctly. NOTE: On certain cars there is a discrepancy between which cars came originally with Dual Mass Flywheels. It is a good idea to confirm if you do or do not have a Dual Mass Flywheel prior to ordering a clutch kit. |
|
Clutch Super Kit  |
Now available from Pelican is our clutch super kit for the E30 BMW. In this kit, you get everything you need to replace your clutch all at once. All the parts contained in the kit are either OEM or Genuine BMW parts. If you are spending the time and effort to pull your engine out of your car, you might as well make sure that you are replacing and fixing every piece that might need attention, while you have access to it. Here's what the kit includes:- Three piece Sachs clutch kit
- New bolts for flywheel and clutch pressure plate
- New crankshaft rear seal (aka flywheel seal)
- New transmission Input Shaft seal
- New selector rod seal
- New exhaust gaskets
- New pilot bearing
- New release bearing spring clip
- New clutch pivot pin
- New slave cylinder
- New slave cylinder hose
If you don't already own one, you will also need the flywheel pilot bearing puller tool for removing the flywheel pilot bearing. You will also need the clutch alignment tool if you don't already own one.
NOTE: Flywheels are not included with these kits. If your old flywheel is worn beyond its re-surfacing limit, it should be replaced with a new one available below. |
|
PEL-SKCKE30-01N | Clutch Super Kit, 318i (1984-85) [More Info] | $320.25 |  |
PEL-SKCKE30-02N | Clutch Super Kit, 318i/is/iC (1991) [More Info] | $357.00 | |
PEL-SKCKE30-03N | Clutch Super Kit, 325/e/es (1984-86) For cars without Dual-Mass Flywheel [More Info] | $386.25 | |
PEL-SKCKE30-04N | Clutch Super Kit, 325/e/es (1984-86) For cars with Dual-Mass Flywheel [More Info] | $376.00 | |
PEL-SKCKE30-05N | Clutch Super Kit, 325i/is/iC (1987-91) [More Info] | $359.25 | |
PEL-SKCKE30-06N | Clutch Super Kit, 325iX (1987-91) [More Info] | $359.50 | |
PEL-SKCKE30-07N | Clutch Super Kit, M3 (1987-91) [More Info] | $631.00 | |
Clutch Package - 3 Piece Kit |
| Our 3-piece package includes all original equipment Sachs clutch components. Contains New Pressure Plate, New Clutch Disc and a new Throw-out bearing. Save money over the costs of the individual pieces by purchasing the kit in this convenient three-piece package. |
|
| Clutch Kits |
21-21-1-223-572-M38 | | $171.75 | |
21-21-1-223-571-M38 | Clutch Kit for Twin Mass Flywheel, 318i/is/iC (1991)
Brand: Sachs [More Info] |  |
| $231.00 | |
21-21-1-223-102-M38 | Clutch Kit, 325i/is/iC (1987-91)
Brand: Sachs [More Info] | |
| $226.25 | |
21-21-1-223-103-M38 | | $223.75 | |
21-21-1-223-119-M38 | Clutch Kit 325/e/es (thru 04/86)
Brand: Sachs [More Info] | |
| $258.75 | |
21-21-1-223-546-M38 | Clutch Kit for Twin Mass Flywheel, 325/e/es (from 05/86)
Brand: Sachs [More Info] | |
| $244.25 | |
21-21-2-226-854-M38 | | $480.00 | |
Centerforce Clutches |
| Available now from Pelican are Centerforce brand performance clutches. Pelican offers two different packages for your BMW, the Centerforce 1 and the Centerforce Dual friction kit. The Centerforce 1 offers 30% more holding capacity than a stock OEM clutch while maintaining a stock pedal feel. This system is recommended as the finest quality upgrade from the original equipment clutch. The Centerforce Dual Friction kit generates up to a 90% increase in holding capacity over stock systems. This clutch/disc set is designed for use with engines producing high horsepower and torque output, and any radically altered high performance street vehicles. All Centerforceฎ clutch systems provide smooth engagement and light pedal pressure without compromising high performance. Centerforce clutch kits include pressure plate and clutch disc. Throwout bearing must be purchased separately. |
|
| Centerforce 1 Clutch Kits |
PEL-CF121018 | Centerforce 1 Clutch Kit, 318i (1984-86) [More Info] | $343.25 | |
PEL-CF062076 | Centerforce 1 Clutch Kit, 318i/is/iC (1991) Cars without Dual Mass Flywheel [More Info] | $670.65 | |
PEL-CF008010 | Centerforce 1 Clutch Kit, 318i/is/iC (1991) Cars with Dual Mass Flywheel [More Info] | $432.45 | |
PEL-CF121295 | Centerforce 1 Clutch Kit, 325/e/es (1984-87) Cars without Dual Mass Flywheel [More Info] | $705.95 | |
PEL-CF645649 | Centerforce 1 Clutch Kit, 325/e/es (1987-88) Cars with Dual Mass Flywheel [More Info] | $429.35 | |
PEL-CF058296 | Centerforce 1 Clutch Kit, 325i/is/iC (1987-92) [More Info] | $499.35 | |
PEL-CF774775 | Centerforce 1 Clutch Kit, M3 (1987-91) [More Info] | $469.20 | |
