| Porsche 996 & Boxster Tools - Page 1 |
| If you are opting to save money by working on your car yourself, it is a very wise investment to have the proper tools. Some tasks may be nearly impossible to perform without the specific tool designed to assist you in the process. Do it right with the right tools. Some tools may be special order, and may take a few days to be shipped out. All tools sold by Pelican Parts are not returnable, except for warranty repair or replacement. |
|
Lug Nut Soft Socket |
Every Porsche owner needs a Soft Socket in their tool box! This high quality, chrome plated lug nut socket was designed with inlaid high impact nylon to prevent rounded corners or scratches on your lug nuts. Cannot be used with air tools.
NOTE: Not for use with steel lug bolts/nuts, ONLY for original aluminum lug nuts! Also not to be used to break stuck lug nuts free from the wheels! |
|
PEL-SS-19 | Lug Nut Soft Socket [Photo] | $25.45 |  |
| This special thin walled, heavy duty IMPACT socket with a riveted Aluminum insert was developed for the crucial task of R&R of wheel lugs nuts/bolts without marring or scuffing the surface of the wheel or bolts. Measuring at 3.5" to fit into deep recess of wide wheels. Comes with a limited life-time warranty, guaranteed to be the last 19mm wheel lug socket you'll ever buy. |
|
PEL-TOL-LUG19MM | Impact Duty Soft-Walled Lug Nut Socket - 19mm [Photo] | $28.30 | |
Oil Filter Wrenches |
| This factory tool for your 996 or Boxster will surely do the trick! Use it in conjunction with a 27mm 6-point socket, and you'll be done with your oil change in no time. |
|
000-721-920-40-OEM | Oil Filter Removal Socket Wrench Tool - 996/996 Turbo/GT3 (1999-2004), Boxster/Boxster S (1997- ), 997 Carrera (2005- )
Brand: Genuine Porsche [Photo] | $37.00 | |
| TOL-SK34277 | 27mm 1/2"-Drive Deep Impact Socket, 6-point, SK Tools | $22.95 | |
Drain Plug Removal Tool |
| If your Boxster's drain plug is the tamper-proof type, you'll need this tool to remove the drain plug. |
|
PEL-TOL-ST0229 | 16mm XZN Triple Square (Tamper Proof) Drain Plug Removal Tool, 1/2 inch drive [Photo] | $28.30 | |
Hub/Bearing Extractor and Installer Kit  |
| Want to save on a costly repair, replace your own bearing or pull your own hubs with our all in one Porsche kit. Designed to efficiently remove and install hub and wheel bearings, this kit will make the notoriously difficult job of removing rear wheel bearings a breeze. The kit comes with a set of adapters specific to the Porsche series, but can also be used on all front and rear wheel drive vehicles with independent suspension. Also for R&R of the rear wheel bearings only on models with drum brakes independent rear suspension. |
|
| PEL-TOL-SIRB90-P2 | Rear Hub/Bearing Extractor and Installer Kit, 911 1973-on, 924, 944, 968, All, Boxster | $166.00 | |
Oil Seal Installation Tools |
| When rebuilding your motor, do the job right with our oil seal installation tools. Designed to perform an installation that is perfectly aligned with the case, these installation tools will guarantee a leak-free seal, without damaging your valuable case. |
|
PEL-TOL-P250 | Oil Seal Installation Tool (for original-style seal) - Flywheel Side, 996 Carrera 2/4 (1999-04), Boxster/Boxster S (1997-04), Each [Photo] | $157.90 | |
PEL-TOL-P251 | Oil Seal Installation Tool - Pulley Side, 996 Carrera 2/4 (1999-04), Boxster/Boxster S (1997-04), Each [Photo] | $103.00 | |
PEL-TOL-P252 | Oil Seal Installation Tool - Mainshaft Seal, 996 Carrera 2/4 (1999-04), Boxster/Boxster S (1997-04), Each [Photo] | $95.00 | |
Camshaft Tools |
| This special service tool was developed for the crucial task of securing the Intake and Exhaust Camshafts in relation to each other during base timing, etc. Trying to do this task with any other method is risking a total engine failure. |
|
PEL-TOL-P253 | Camshaft Securing Tool - 996 Carrera 2/4 (1999-01), Boxster (1997-04), Each [Photo] | $190.30 | |
