| Porsche 996 & Boxster Oil Circulation - Page 4 |
Oil System Sending Units |
| Make sure that your oil system is working properly by keeping your electrical sending units and gauges in good working order. Faulty gauges can give you false readings which can jeopardize the health of your engine in an emergency. Having good working gauges is cheap insurance against loss of oil pressure (full engine rebuild). |
|
| Oil Temperature Sending Units |
996-606-405-01-M100 | Oil Temperature Sending Unit, 996 Carrera 2/4 (1999-01), Boxster (1997-99), Each
Brand: Genuine Porsche [Photo] |  |
| $22.50 |  |
996-606-410-00-M100 | Oil Temperature Sending Unit, Includes Sealing Ring, 996 Carrera 2/4 (2002-04), 996 Turbo (2001-05), Boxster/Boxster S (2000-04), Each
Brand: Genuine Porsche [Photo] | |
| $17.75 | |
| Oil Pressure Senders |
| Is your oil pressure sender leaking? Is your oil pressure warning light on your dash not working properly? Very often, the cause is a malfunctioning oil pressure switch. Replace yours and solve the problem. |
|
986-606-203-03-M100 | Oil Pressure Sender, Boxster (thru 1997), Each
Brand: Genuine Porsche [Photo] | |
| $9.25 | |
986-606-203-03-M100 | Oil Pressure Sender, Boxster/Boxster S (1998-04), Each
Brand: Genuine Porsche [Photo] | |
| $9.25 | |
996-606-203-02-M100 | Oil Pressure Sender, 996 Carrera 2/4 (1999-04), Each
Brand: Genuine Porsche [Photo] | |
| $58.75 | |
996-606-203-02-M100 | Oil Pressure Sender, 996 Turbo (2001-05), Each
Brand: Genuine Porsche [Photo] | |
| $58.75 | |
| Oil Level Senders |
| Replace a faulty oil-level sender and get a reading on your oil level. |
|
| 996-606-150-00-OEM | Oil Level Sender, 996 Carrera 2/4 (1999-2004), Boxster/Boxster S (1997-2004), Each
Brand: Genuine Porsche | $54.25 | |
| 996-606-150-00-OEM | Oil Level Sender, 996 Turbo (2001-05), Each
Brand: Genuine Porsche | $54.25 | |
Crankcase Oil Pressure Relief Pistons |
| The 911 crankcase has two oil pressure relief pistons located deep within the recesses of the crankcase. These pistons control the oil pressure that flows through the engine. It's important that these spring & pistons are not worn out, otherwise your oil pressure within your engine may not be at it's proper operating value. |
|
901-107-531-00-M260 | Oil Pressure Relief Spring (2 per car, sold per each), 996 Turbo (2001-05)
Brand: OEM [Photo] [Photo] | |
| $2.75 | |
911-107-512-00-M260 | Oil Pressure Relief Piston, 996 Turbo (2001-05)
Brand: OEM [Photo] [Photo] | |
| $10.75 | |
930-107-533-00-M100 | Oil Pressure Relief Sleeve, 996 Turbo (2001-05)
Brand: Genuine Porsche [Photo] | |
| $7.25 | |
999-064-026-02-M260 | Oil Pressure Relief Cap, 996 Turbo (2001-05)
Brand: OEM [Photo] [Photo] | |
| $8.50 | |
900-123-106-30-M131 | Oil Pressure Relief Cap Sealing Ring, 18x24mm, 996 Turbo (2001-05)
Brand: Fischer & Plath [Photo] [Photo] | |
| $0.50 | |
Oil System Tools |
| You can never perform a good job on repairing your Porsche if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
|
| Oil Filter Wrench |
| This factory tool for your 996 or Boxster will surely do the trick! Use it in conjunction with a 27mm 6-point socket, and you'll be done with your oil change in no time. |
|
000-721-920-40-OEM | Oil Filter Removal Socket Wrench Tool - 996/996 Turbo/GT3 (1999-2004), Boxster/Boxster S (1997- ), 997 Carrera (2005- )
Brand: Genuine Porsche [Photo] | $37.00 | |
| TOL-SK34277 | 27mm 1/2"-Drive Deep Impact Socket, 6-point, SK Tools | $21.25 | |
