Parts CatalogAccessories CatalogTech InfoTech Forums
 
  Search our site:   
View Recent Cars  |  Cart | Project List | Order Status | Help    
 
- Back to Catalog -
Pelican Parts Tool Catalog
Pressure Bleeders
Mityvac Brake Bleeder Kit
Power Bleeders
Lug Nut Soft Socket
Lug Nut Torque Socket Set
Oil Filter Wrenches
Porsche Engine Rebuild Stand
Smart Racing Products Alignment Tools
Hub/Bearing Extractor and Installer Kit
Oil Seal Installation Tools
Cooling System Tools
Cooling System Pressure Tester
Camshaft Tools
Tie Rod Tools
Magnetic Box "V" Wrench (17mm)
O2 Sensor Removal Tool
Spanner Wrench Set
Transmission Mounting Bolt Removal Tool
CV Bolt Removal Tools
Custom Service Cover
Durametric Software Diagnostic Tool for Porsche
AutoEnginuity Complete OBDII Diagnostic Tool
ScanTool Software Expansions
Air/Fuel Ratio Meter
WEGO IV Wide-Band Air/Fuel Ratio Tuning Aid
Innovate Motorsports LM-2
Jack Stands
New Pig Form-A-Funnel
AC Hydraulic Jacks
Stud Removal Tools
Dremel Variable Speed Rotary Tool Kit
Clutch Alignment Tool
- Back to Catalog -
Home >  911 Catalog996Tools & Books >   Porsche 996 Tools  
Porsche 996 Tools - Page 3

Cooling System Tools

Cooling System Pressure Tester
MOTIVE PRODUCTS RADIATOR BLEEDER/PRESSURE TESTER - Having cooling problems? Can't find a leak? Having problems bleeding your radiator system? If so, this tool can help. To pressure test your radiator, you will need to also buy PEL-0090. To vacuum test you will need to have a vacuum pump or purchase PEL-1708, and PEL-0420. For instructions vist the Motive Products website HERE.

PEL-1850

Radiator and Universal Bleeder/Pressure Tester
   Brand: Motive Products    [More Info]

$34.95

PEL-0090

2 Qt. Bleeder Tank and Pump (reservoir caps sold seperately)
   Brand: Motive Products    [More Info]

$37.00

PEL-1708

Power Extractor
   Brand: Motive Products    [More Info]

$64.95
PEL-0420

Radiator Power Tester Connection Kit
   Brand: Motive Products    [More Info]

$9.95

Camshaft Tools

This special service tool was developed for the crucial task of securing the Intake and Exhaust Camshafts in relation to each other during base timing, etc. Trying to do this task with any other method is risking a total engine failure.

PEL-TOL-P253

Camshaft Securing Tool - 996 Carrera 2/4 (1999-01), Each     [More Info]

$235.00

Tie Rod Tools


PEL-TOL-P1014

Tie Rod End Puller    [More Info]

$71.40

Magnetic Box "V" Wrench (17mm)

This unique-looking tool is used to aid in the removal of the engine/transmission bolts. The V-Wrench holds the nut on the other side of the engine compartment so that you can remove the nut from the transmission. The V design holds the nut steady, unlike a normal wrench, and allows you to remove the bolt on the other side without the help of an assistant.

PEL-TOL-P222

Magnetic Box "V" Wrench (17mm)     [More Info]

No Longer Available 

O2 Sensor Removal Tool


PEL-4491B

Oxygen Sensor Removal Tool, 22mm, 3/8" drive     [More Info]

$25.95

Spanner Wrench Set

This four piece spanner wrench set includes the sizes 27mm, 30mm, 32mm, 36mm, and is most useful for various repairs on your car.

PEL-TOL-P242

Spanner 4 Wrench Set, 911, 930, 914-6, 944, 968 (27mm, 30mm, 32mm, 36mm)     [More Info]

$60.50

Transmission Mounting Bolt Removal Tool


TOL-KDT2305

10 MM Triple Square Socket for Removal of Lower Transmission Bolt, 996 (1999-04)    [More Info]

$8.95

CV Bolt Removal Tools

Avoid stripping your bolt heads and spending wasted hours cutting and grinding them off by using this special tool to easily remove those pesky CV joint bolts. This tool is for use with 12-point star-shaped bolts only. Please make sure to check your bolts before ordering. It's common for previous owners to replace the 12-point star shaped bolts with more standard allen head bolts instead. Although the 12-point pattern allows you to get a better grip on the bolts (with the correct tool), and apply the high torque that the bolts require, previous owners may have stripped out these bolt heads by attempting to use a torx or hex driver instead of the proper tool. A word of caution here - these other tools MAY work, but if they strip the bolt head, then you are in for an entire afternoon of grinding it off the next time it's replaced.

TIP: Spray the bolts down with WD-40 or Liquid Wrench first to loosen the dirt and debris in the bolt head, then scrape out any dirt that may be left. With the socket on a 6" extension, slip the tool into the bolt head and give it a gentle rap on the end with a mallet to seat it firmly. Following this simple procedure will hopefully avoid you from stripping any CV bolts.

PEL-CV-T1

CV Joint Bolt Removal Tool - 8mm, 12-point Socket Driver, 1/2 in. drive    [More Info]

$31.99

PEL-TOL-1170

CV Joint Bolt Removal Tool - 12mm, 12-point Socket Driver, 1/2-inch drive    [More Info]

$43.95

PEL-SK-41422

CV Joint Bolt Removal Tool - 12mm, 1/2-inch Drive, Triple Square Metric Bit Socket    [More Info]

$16.95

  Page 3 of 6  <123456>

        

  Search our site:   

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright Pelican Parts Inc. -    DMCA Registered Agent Contact Page