| Porsche 996 Miscellaneous - Page 5 |
Rennline Magnetic Track Mask |
| Rennline's new track mask is a great way to protect your car's paint from the inevitable rock chips resulting from a good day at the track. Simply clean the surface of your car and apply these magnets and you'll be ready for a worry free event. These will only fit cars with steel hoods! GT3's and GT2's have aluminum hoods. This 2 piece magnetic bra set includes two flat black hood magnets |
|
REN-EM10-BLK | Rennline Magnetic Track Mask, Black, 2-Piece Set, 996/996 Turbo (1999-04) [More Info] | $105.00 |  |
Car Covers  |
| Porsche Factory Car Covers |
The latest car covers from Porsche are the Silverguard+, with two important improvements: the soft inner layer is thicker and now extends over the entire inside lining surface.
All Porsche car covers are custom tailored for a precise fit for each year/model of car. Please note that the 911 applications are listed for cars "With or Without Tail". The front and rear bottom edges are elasticized with reinforced plastic tie-down grommets on each side and all seams are double-stitched. These Porsche car covers also feature a clear rear license plate window. A strong cable lock is provided for a measure of security, plus a handy storage bag is included with each cover.
For maximum paint protection and long car cover life, you should always "dust" your car prior to covering your pride and joy. Dusting your car will remove the small dust particles that can get embedded into the paint if not removed before covering.
If you're interested in a car cover, but prefer different features than these Porsche factory covers offer, try this link for CoverKing CUSTOM car covers... Coverking has you Covered!. |
|
| PNA-508-996-OEM | Porsche Silverguard+ Car Cover, 996 Carrera 2/4 with retractable tail (1999-04), Each
Brand: Genuine Porsche [More Info] | No Longer Available | |
| PNA-508-996-01-OEM | Porsche Silverguard+ Car Cover for 996 with Aero kit, 996 Carrera 2/4 (1999-04), 996 Turbo (2001-05), Each
Brand: Genuine Porsche [More Info] | $204.00 | |
PNA-504-996-OEM | Porsche Weathershield Car Cover, 996 Carrera 2/4 (1999-04), Each
Brand: Genuine Porsche [More Info] | No Longer Available | |
| PNA-504-BAG-OEM | Porsche Car Cover Duffel Bag (included with above car covers)
Brand: Genuine Porsche [More Info] | No Longer Available | |
| Coverking Car Covers |
| Pelican Parts has selected Coverking as our sole car cover supplier. Coverking has proven their experience and quality in manufacturing custom-made car covers for more than a decade. Available in a wide variety of materials for just about any car, you'll be sure to find the perfect cover for your car. Easily order your custom cover with our simple Car Cover Wizard! In six easy to follow steps, you can pick and choose your color, size, style, and add a bunch of custom options. Even preview your selection before you add it to your cart! Allow 2-3 weeks for delivery. |
|
Jack Support |
| Jack your Porsche up with a floor jack by using our Jack Pad to protect the delicate underside of your car. Designed specifically for the 996 and Boxster, this Jack Pad provides a safe location for you to place your jack onto the underside jack point of your car, in order to raise and lower it. |
|
PEL-JP-001 | Jack Lifting Plate (w/o Storage case), **Not For Use with AC Hydraulic Floor Jacks** 993, 996, 997, Boxster, Cayman [More Info] | $87.95 | |
| The Floor Jack Pad is the latest addition to our jack pad section and is specifically designed for the Porsche 996 & Boxster applications only. This Floor Jack Pad replaces the cup, located on the floor jack arm, on most 2 1/4 Ton and larger floor jacks. The Floor Jack Pad gives your floor jack the lower profile needed to get under those lowered Porsches, plus eliminates the risk of your car slipping off of the floor jack once locked into the jack receptacle. |
|
PWE-FJP-003 | Floor Jack Pad, 996/996 Turbo (1999-2003)- Use with jack receptacle hole 1 1/8" or larger, **NOT for use with AC Hydraulic jacks** [More Info] | $62.20 | |
| Most newer cars have specific areas in the chassis designed for safely lifting the vehicle. These jack points require a pinned adapter that professional technicians use with their hydraulic car lifts. This jack pad locks into the car by simply turning the unit and is specifically designed to be used with most floor style hydraulic jacks. Its low profile design gives your jack sufficient clearance to slide under the car and then safely lifts it to minimize potential slippage. Comes with a rubber top pad to eliminate the undercoating of your car from being damaged. If you are using these pads with a car lift, you will need (4) units to properly lift the vehicle. All steel construction, water jet and tig welded seams with a durable powder-coated red finish. |
|
REN-T02-POR | Rennline Jack Plate (Lock Type), each, **Not For Use with AC Hydraulic Floor Jacks** 911/911 Turbo (1999-2004) [More Info] | $35.00 | |
996 Engine Protection Plate |
| Protect your engine case and water lines from the road, low driveways and speed bumps. These strong stainless steel engine protector plates give you peace of mind. Simple bolt-on with no modifications. Stainless steel hardware and instructions included. |
|
PEL-909644 | 996 Engine Protection Plate, 996 (1999-05), 996 Turbo (2001-05) [More Info] | No Longer Available | |
Microfiber Polishing Towels |
| These 3-pack Microfiber Polishing Towels measure 16 inches x 16 inches and are ideal for polishing your car's exterior, interior, and wheels. These towels remove excess wax without scratching and are both streak-free and lint-free. |
|
PEL-MIC-FBR | Microfiber Polishing Towels, 16 in x 16 in, Three per pack [More Info] | $3.95 | |
