| Porsche 924S/944/968 Transmission - Page 2 |
Transmission Synchro Hubs |
| Stop/Anchor Blocks |
| 930-302-325-00-M260 | Stop Block, 1st-3rd Gear, 924 (1979), 924 Turbo (through 1980), Each
Brand: OEM [More Info] |  |
| $12.00 |  |
| 928-302-321-00-M260 | Anchor Block, 1st-3rd Gear, 924 (1979), 924 Turbo (through 1980),
Brand: OEM [More Info] | |
| $12.50 | |
| 930-302-325-00-M260 | Stop Block, 4th-5th Gear, 924 (1979), 924 Turbo (through 1980), Each
Brand: OEM [More Info] | |
| $12.00 | |
Transmission Needle Bearings |
| Replace all your needle bearings when rebuilding your transmission. |
|
| 016-311-115-OEM | Needle Cage Bearing, 4th Gear, 924S/944 All (1983-89), Each
Brand: Genuine Porsche [More Info] | $19.25 | |
| 016-311-116A-OEM | Needle Cage Bearing, 5th Gear, 924S/944 All (1983-89), Each
Brand: Genuine Porsche [More Info] | $31.50 | |
| 999-201-476-00-OEM | Needle Bearing, Transmission Case Front, 924S/944 All (1983-89), Each
Brand: Genuine Porsche [More Info] | No Longer Available | |
| 088-311-123-OEM | Needle Sleeve Bearing, Rear Transmission Case, 924S/944 All (1983-89), Each
Brand: Genuine Porsche [More Info] | $17.50 | |
| 016-311-207A-OEM | Needle Cage Bearing, 1st Gear, 924S/944 All (1983-89), Each
Brand: Genuine Porsche [More Info] | $13.50 | |
| 016-311-229A-OEM | Needle Cage Bearing, 2nd Gear, 924S/944 All (1983-89), Each
Brand: Genuine Porsche [More Info] | $14.75 | |
Transmission Main Shaft Seal |
| The Main Shaft seal prevents transmission oil from leaking out the driveshaft into the flywheel/clutch area. This especially gets messy when the flywheel starts swinging oil around like a Texas twister! |
|
| 016-311-113-C-M213 | Main Shaft Seal, 924S/944 All (1983-89), Each
Brand: DPH [More Info] | |
| $3.25 | |
Differential Seals |
| 999-113-183-40-M30 | Seal for Differential Output Shaft (45 X 68 X 10 mm) (2 per car, sold individually), 924 (1979 5-speed), 924 Turbo (1980), Each
Brand: Elring Klinger [More Info] | |
| $4.25 | |
| 016-409-399-B-M5213 | Seal for Differential Output Shaft (45 x 60 x 8 mm) (2 per car, sold individually), 924 (4-speed), 924 (1980- ), 924 Turbo (1981- ), 924S, 944/S/S2/Turbo, Each
Brand: DPH [More Info] | |
| $3.75 | |
| 999-113-347-40-M204 | Transmission Output Shaft Side Seal, 48 x 68 x 10 (2 per car, sold individually), 968
Brand: Kaco [More Info] | |
| $12.75 | |
Transmission Main Shaft Bearings  |
| These are the bearings that support the main driveshaft. The intermediate plate bearing is a four-point ball bearing. The flywheel end bearing is a cylindrical roller bearing. |
|
| 016-311-427-OEM | Main Shaft Bearing, Front, 924S/944 All (1983-89), Each
Brand: Genuine Porsche [More Info] | $59.75 | |
| 016-311-427C-OEM | Main Shaft Bearing, Front, 944S, 944S2, 944 Turbo All (1983-91), Each
Brand: Genuine Porsche [More Info] | $57.75 | |
| 999-052-030-00-M34 | Main Shaft Bearing, Middle, 924 5-speed (1979), 924 Turbo (1980), Each
Brand: FAG [More Info] | |
| $58.50 | |
| 016-311-445-M100 | Main Shaft Bearing, Rear, 924S/944 All (1983-89), Each
Brand: Genuine Porsche [More Info] | |
| $93.75 | |
