| Porsche 924S/944/968 Tools - Page 5 |
Ride Height Wrench |
| don't be without this Ride Height Combination Wrench went setting up your suspension! Fits the spring plate eccentric 24mm and 36mm bolts. Powder coated for a long lasting finish. |
|
PWE-2436RHW | Ride Height Combination Wrench, 911 1977-89 [Photo] | $30.70 |  |
Extraction Tools |
| Nothing beats the frustration of trying to remove something that isn't going anywhere. Do the job right by using the right tools to remove that gear or bushing. These pullers are designed to properly remove what they were designed to remove, without damaging anything else. |
|
PEL-TOL-P229 | Distributor Drive Gear Puller, 912, 914, 356 [Photo] | $24.20 | |
PEL-TOL-P236 | Oil Piston Pressure Relief Valve Puller, 912, 914, 356 [Photo] | $29.00 | |
PEL-TOL-P239 | Starter Bushing Puller, 12V [Photo] | $33.00 | |
PEL-TOL-P238 | Starter Bushing Puller, 6V [Photo] | $33.00 | |
PEL-4491B | Oxygen Sensor Removal Tool, 22mm, 3/8" drive [Photo] | $23.00 | |
Spanner Wrench Set |
| This four piece spanner wrench set includes the sizes 27mm, 30mm, 32mm, 36mm, and is most useful for various repairs on your car. |
|
PEL-TOL-P242 | Spanner 4 Wrench Set, 911, 930, 914-6, 944, 968, 27mm, 30mm, 32mm, 36mm [Photo] | $63.00 | |
32 MM Oil Line Wrench |
| This oil line wrench is specifically designed for the 944 equipped with 32mm oil line fittings. Manufactured from Chrome-Vanadium Steel for corrosion resistance and years of reliable service. |
|
| PEL-PP902843 | 944 32 MM Oil Line Wrench | $26.95 | |
36 MM Oil Line Wrench |
| Having trouble removing the large oil lines on your Porsche? Then this is the wrench for you. Precision laser cut 36MM wrench with sculpted handle for maximum grip on the fitting and in your hand. 12 point design will not slip off or round fittings like open-end wrenches do. 15 degree head design allows wrench to operate in the tight confines of the engine compartment. If you own a Porsche 911, 930, 914-6, you'll need this wrench. |
|
PEL-PW-OLW | 36 MM Oil Line Wrench [Photo] | $28.65 | |
Clutch Alignment Tool  |
| The clutch alignment tool is used to orient the clutch disc with respect to the flywheel when mounting your pressure plate. You may have tremendous difficulty remating the transmission and the engine if the disc is misaligned with the pressure plate upon assembly. |
|
| PEL-TOL-CA1 | Clutch Alignment Tool, 356 All, 911 (1965-71), 912/912E, 914 All, 924 (1976-82) | $8.85 | |
| PEL-TOL-CA2 | Clutch Alignment Tool, 911 (1972-86) | $8.85 | |
| PEL-TOL-CA3 | Clutch Alignment Tool, 911, C2/4, 993 (1987-98), 911/C2/993 Turbo, 944/944 Turbo/968 | $8.85 | |
Custom Service Cover |
| These durable covers are made from 25 oz., double stitched, 100% virgin vinyl and lined with an Extra thick, super soft, porous flannel backing to protect your paint from dents and abrasions. The cover is felt bound around the edges and hand tailored for maximum fit and strength. A handy pocket is conveniently sewn into the cover to hold your tools for quick access. All covers come with a 5 Year Limited Warranty, the Best in the industry, against manufacturers defects. |
|
| PEL-COLSC001 | Custom Rear Service Cover (1pc w/Pocket), 356 All | $90.65 | |
| PEL-COLSC002 | Custom Rear Service Cover (1pc w/Pocket), 911/911 Turbo 1966-96 | $99.65 | |
| PEL-COLSC003 | Custom Front Service Cover (3pc), 924/944/944 Turbo All | $90.65 | |
| PEL-COLSC004 | Custom Front Service Cover (1pc), 928 All | $99.65 | |
| PEL-COLSC011 | Custom Rear Service Cover (2pc), 993/C2/C4 1990-96 | $106.90 | |
| PEL-COLSC013 | Custom Front Trunk Service Cover (3pc), 911 1966-96 | $100.90 | |
| PEL-COLSC015 | Custom Front Trunk Service Cover (1pc), Boxster 1997-On | $111.95 | |
| PEL-COLSC016 | Custom Rear Trunk Service Cover (1pc), Boxster 1997-On | $111.95 | |
| PEL-COLSC017 | Custom Cockpit/Engine Service Cover (1pc), Boxster 1997-On | $111.95 | |
| PEL-COLSC025 | Custom Rear Service Cover (1pc w/Pocket), 996 1997-On | $111.95 | |
| PEL-COLSC028 | Custom Front Trunk Service Cover (3pc), 996/911 Turbo 2001-On | $111.95 | |
